NextGen Socio & Enviro Advisors

The Tamil Nadu Factories Rules, 1950

Arrangement of Rules

G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules

SCHEDULE I

SCHEDULE I

1. The breaking, cutting, dressing or carving of bricks, stone, concrete, slag or similar materials by means of a hammer, a chisel, pick or similar hand tool. or by means of a portable tool driven by mechanical power, and the dry grinding of surfaces of any such materials by means of a wheel or disc driven by mechanical power, wherein any of the foregoing cases particles or fragments am liable to be thrown off towards the face of the operator in the course of the process. 2. The dry grinding of surfaces of metal by supplying them by hand to a wheel, disc or hand driven by mechanical power and of surfaces of metal by means of a portable tool driven by mechanical power. 3. The dividing into separate parts of metal, bricks, stone, concrete or similar materials by means of high speed of saw driven by mechanical power or by means of an abrasive cutting off wheel or disc driven by mechanical power. 4. The turning of metals, or articles of metal, where particles or fragments are liable to the thrown off towards the fact of the operator in the course of the process. 5. Drilling by means of portable tools, where particles or fragments are liable to be thrown off towards the face of the operator in the course of the process. 6. The welding and cutting of metals by means of an electric, oxy-acetylene or similar process. 7. The hot fettling of steel castings by means of a flux injected burner or air-torch, and the dc-seaming of metal. 8. The fettling metal castings, involving the removal of metal, including runners, gates and risers and the removal of any other material during the course of such fettling. 9. The chipping of metal, and the chipping knocking out, cutting out or cutting off cold rivets, bolts, nuts, lugs, pins, collars, or similar articles from any structure or plant, or from part of any structure or plant, by means of a hammer, chisel, punch or similar hand tool, or by means of a portable tool driven by mechanical power. 10. The chipping or sculling of paint, scale, slag rust or other corrosion from the surface of metal and other hard materials by means of a hand tool or by a portable tool driven by mechanical power. 11. The breaking of scrap metal by means of a hammer or by means of a tool driven by mechanical power. 12. The routing of metal, where particles or fragments are liable to be thrown off towards the face of the operator in the course of the process. 13. Work with drop hammers and power hammers, used in either case for the manufacture of forgings. and work by any person not working with such hammers whose work is carried on in such circumstances and in such a position that particles or fragments arc liable to be thrown off towards his face during work with drop hammers or power hammers. 14. Work at a furnace where there is risk to the eyes from molten metal. 15. Pouring or skimming of molten metal. 16. Work involving risk to the eyes from hot sand being thrown off. 17. Turning or dressing of an abrasive wheel. 18. The handling in open vessels or manipulation of strong acids or dangerous corrosive liquids or materials, and the operation, maintenance or dismantling of plant or any part of plant, being plant or part of plant, which contains or has contained such acids liquids or materials, unless the plant or part of plant has been so prepared (by isolation, reduction of pressure, or otherwise) treated or designed and constructed as to prevent risk of injury 19. Any other process wherein there is a risk of injury to eyes from particles or fragments thrown off during the course of the process. 114