The Tamil Nadu Factories Rules, 1950
Arrangement of Rules
G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules
SCHEDULE III
WOOD-WORKING MACHINERY
1. Definitions For the purposes of this schedule
(a) Wood working machine means a circular saw, band saw, planning machine, chain mortising machine or vertical spindle moulding machine operating on wood or cork.
(b) Circular saw means circular saw working in a bench (including a rack bench) but does not include a pendulum or similar saw which is moved towards the wood for the purpose of cutting operation.
(c) Band saw means a band saw, the cutting portion of which runs in a vertical direction but does not include a log saw or band resawing machine.
(d) Planning machine means machine for overhand planning or for thicknessing or for both operations. 2. Stopping and starting device An efficient stopping and starting device shall be provided on every wood working machine. The control of-this device shall be of such a position as to be readily and conveniently Operated by the person in charge in the machine. 3. Space around machines The space surrounding every wood-working machine in motion shall be kept free from obstruction. 4. Floors The floor surrounding every wood-working machine shall be maintained in good and level condition, and shall not be allowed to become slippery, and, as far as practicable, shall be kept free from chips or other loose material. 5. Training and supervision
(1) No person shall be employed at a wood-working machine unless he has been sufficiently trained to work that class of machine, or unless he works under the adequate supervision of a person who has a thorough knowledge of the working of the machine.
(2) A person who is being trained to work a woodworking machine shall be fully and carefully instructed as to the dangers of the machine and the precautions to be observed to secure safe working of the machine. 6. Circular saws Every circular saw shall be fenced as follows:
(a) Behind and in direct line with the saw there shall be a riving knife, which shall have a smooth surface, shall be strong. rigid and easily adjustable, and shall also conform to the following conditions:
(i) The edge of the knife nearer the saw shall form an arc of a circle having a radius not exceeding the radius of the largest saw used on the bench.
(ii) The knife shall be maintained as close as practicable to the saw, having regard to the nature of the work being done at the time, and, at the level of the bench table, the distance between the front edge of the knife and the teeth of the saw shall not exceed 12.7 millimeters.
(iii) For a saw of a diameter of less than 61 centimeters, the knife shall extend upwards from the bench table to within 2.5 centimeters of the top of the saw, and for a saw of a diameter of 61 centimeters or over shall extend upwards from the bench table to a height of at least 22.9 centimeters.
(b) The top of the saw shall be covered by a strong and easily adjustable guard, within a flange at the side of the saw farthest from the fence. The guard shall be kept so adjusted that the said flange shall extend below the roots of the teeth of the saw, The guard shall extend from the top of the riving knife to a point as low as practicable at the cutting edge of the saw.
(c) The part of the saw below the bench table shall be protected by two plates of metal or other suitable material one on each side of the saw; such plates shall not be more than 15.2 centimeters apart, and shall extend from the axis of the saw outwards to a distance of not less than 5.1 centimeters beyond the teeth of the saw. Metal plates, if not beaded, shall be of a thickness of at least 3 millimeters or, if beaded, be of a thickness of at least 3 millimeters. 7. Push sticks A push stick or other suitable appliance shall be provided for use at every circular saw and at every vertical spindle moulding machine to enable the work to be done without unnecessary risk. 8. Band saws Every band saw shall be guarded as follows:
(a) Both sides of the bottom pulley shall be completely encased by sheet or expanded metal or other suitable materials.
(b) The front of the top pulley shall be covered with sheet or expanded metal or other suitable materials.
(c) All portions of the blade shall be enclosed or otherwise securely guarded except the portion of the blade between the bench table and the top guide. 9. Planning machines
(1) A planning machine (other than planning machine which is mechanically fed) shall not be used for overhand planning unless it is fitted with a cylindrical cutter block.
(2) Every planning machine used for overhand planning shall be provided with a "bridge" guard capable of covering the full length and breadth of the cutting slot in the bench, and so constructed as to be easily adjusted both in a vertical and horizontal direction.
(3) The feed roller of every planning machine used for thicknessing, except the combined machine for overhand planning and thicknessing, shall be provided with an efficient guard. 10. Vertical spindle moulding machines
(1) The cutter of every vertical spindle moulding machine shall be guarded by the most efficient guard having regard to the nature of the work being performed.
(2) The wood being moulded at a vertical spindle moulding machine shall, if practicable, be held in a jig or holder of such construction as to reduce, as far as possible, the risk of accident to the worker. 11. Chain mortising machines The chain of every chain mortising machine shall be provided with a guard which shall enclose the cutters as far as practicable. 12. Adjustment and maintenance of guards The guards and other appliances required under this schedule shall be
(a) Maintained in an efficient state,
(b) constantly kept in position while the machinery is in motion, and
(c) so adjusted as to enable the work to be done without unnecessary risk. 13. Exemptions Paragraph 6, 8, 9 and 10 shall not apply to any wood-working machine in respect of which it can be proved that other safeguards are provided, maintained and used which render the machine as safe as it would be if guarded in the manner prescribed in this schedule.
