NextGen Socio & Enviro Advisors

The Tamil Nadu Factories Rules, 1950

Arrangement of Rules

G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules

SCHEDULE VI

SCHEDULE VI

MANUFACTURE AND TREATMENT OF LEAD AND CERTAIN COMPOUNDS OF LEAD

1. Exemptions

Where the Chief Inspector is satisfied that all or any of the provisions of this schedule are not necessary for the protection of the persons employed he may by certificate in writing exempt any factory from all or any of such provisions, subject to such conditions as he may specify' therein.

2. Definitions

For the purposes of this schedule

(a) "Lead compound" means any compound of lead other than galena which, when treated in the manner described below, yields to an aqueous solution of hydrochloric acid, a quantity of soluble lead compound exceeding, when calculated as lead monoxide, five per cent. of the dry weight of the portion taken for analysis. In the case of paints and similar products and other mixtures containing oil or fat the "dry weight" means the dry weight of the material remaining after the substance has been thoroughly mixed and treated with suitable solvents to remove oil, fats, varnish or other media. The method of treatment shall be as follows: A weighed quantity of the material which has been dried at 100 ° C and thoroughly mixed shall be continuously shaken for one hour, at the common temperature with 1,000 times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent. by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear liberate shall then be precipitated as lead sulphide and weighed as lead sulphate.

(b) "Efficient exhaust draught" means localized ventilation effected by heat or mechanical means, for the removal of gas, vapour, dust or fumes so as to prevent them (as practicable under the atmospheric conditions usually prevailing) from escaping into the air of any place in which work is carried on. No draught shall be deemed efficient which fails to remove smoke generated at the point where such gas, vapour, fumes or dust originate.

3. Application

This schedule shall apply to all factories or parts of factories in which any of the following operations are carried on:

(a) Work at a furnace where the reduction or treatment of zinc or lead ores is carried on.

(b) The manipulation, treatment or reduction of ashes containing lead, the desilverising of lead or the melting of scrap lead or zinc.

(c) The manufacture of solder or alloys containing more than ten percent of lead.

(d) The manufacture of any oxide, carbonate, sulphate, chromate, acetate, nitrate, or silicate of lead.

(e) Handling or mixing of lead tetraethyl.

(f) Any other operation involving the use of a lead compound.

(g) The cleaning of workroom where any of the operations aforesaid are carried on.

4. Prohibition relating to women and young persons

No woman or young persons shall be employed or permitted to work in any of the operations specified in paragraph 3.

5. Requirements to be observed

No person shall be employed or permitted to work in any process involving the use of lead compounds if the process is such that dust or fume from a lead compound is produced therein, or the persons employed therein are liable to be splashed with any lead compound in the course of their employment unless the provisions of paragraphs 6 to 14 are complied with.

6. Exhaust draught

Where dust, fume, gas or vapour is produced in the process, provision shall be made for removing them by means of any efficient exhaust draught so contrived as to operate on the dust, fume, gas or vapour as closely as possible to the point of origin. 200

7. [Medical facilities and records of examinations and tests

(1) The occupier of every factory to which the schedule applies shall

(a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose appointment shall be subject to the approval of the Chief Inspector of Factories; and

(b) Provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a).

(2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector.] 201

8. [Medical Examination by Certifying Surgeon

(1) Every worker employed in the processes referred to in paragraph 1 shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for lead in blood and urine, ALA in urine, hemoglobin content, stippling of cells and steadiness tests. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon.

(2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every three calendar months. Such re-examination shall, wherever the Certifying Surgeon considers appropriate, include tests specified in sub-paragraph (1).

(3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 27. The record of examination and re-examinations carried out shall be entered in the Certificate and the Certificate shall be kept in the custody of the Manager of the Factory. The record of each examination carried out under sub- paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a Health Register in Form 17.

(4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector.

(5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated.

(6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said process unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes.)

9. Food, drinks, etc., prohibited in workrooms

No food, drink, pan and supari or tobacco shall be brought into or consumed by any worker in any workroom in which the process is carried on and no person shall remain in any such room during intervals for meals or rest.

10. Protective clothing

Suitable protective overalls and head coverings shall be provided, maintained and kept clean by the factory occupier and such overalls and head coverings shall be worn by the persons employed.

11. Cleanliness of workrooms, tools, etc

The rooms in which the person ’ s arc employed and all tools and apparatus used by them shall be kept in a clean state.

12. Washing facilities

(1) The occupier shall provide and maintain for the use of all persons employed, suitable washing facilities consisting of

(a) a trough with a smooth impervious surface fitted with a waste pipe without plug and of sufficient length to allow at least 61 centimeters for every ten persons employed at any one time, and having a constant supply of clean water from taps or jets above the trough at intervals of not more than 61 centimeters; or

(b) atleast one wash-basin for every ten persons employed at any one time, fitted with a waste pipe and plug and having a constant supply of clean water, together with, in either case, a sufficient supply of nail brushes, soap or other suitable cleansing material and clean towels.

(2) The facilities so provided shall be placed under the charge of a responsible person and shall be kept dean.

13. Mess-room or Canteen

The occupier shall provide and maintain for the use of the persons employed suitable and adequate arrangements for taking their meals. The arrangement shall consist of the use of a room separate from any workroom which shall be furnished with sufficient tables and benches and unless a canteen serving hot meals is provided, adequate means for warming food. The room shall be adequately ventilated by the circulation of fresh air shall be placed under the charge of a responsible person and shall be kept clean.

14. Cloak-room

The occupier shall provide and maintain for the use of persons employed, suitable accommodation for clothing not worn during working hours, and for the drying of wet clothing.