The Tamil Nadu Factories Rules, 1950
Arrangement of Rules
G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules
SCHEDULE VII
SAFELY OF CENTRIFUGAL MACHINES
1. Centrifugal machine shall be provided with sufficient inter-locking devices that will
physically prevent the lids from being opened whilst the rotating drums or baskets are in motion under power or due to power derived earlier and by then switched off and also prevent the starling of the drums or baskets under power while the lids arc open.
2. The above requirements shall not apply while charging, ploughing and discharging
operations are carried out when the drums or the baskets are rotated at lower speed.
3. Centrifugal machines shall not be operated at a speed in excess of the manufacturer's
rating which shall be legibly stamped by the manufacturers both on the inside of the basket and on the outside of the machine casing at easily visible places.
4. All centrifugal machines shall be provided with effective breaking arrangements [for
bringing the] cage, drum or basket to rest within a seasonable short period of time after the power to drive the motor is cut off.
5. The cages, drums or baskets shall be thoroughly examined by a competent person once in
envy twelve months to check their balance and in case balance at high speed is not observed, effective steps shall be taken to restore their balance before recomissioning the machines.]
