NextGen Socio & Enviro Advisors

The Tamil Nadu Factories Rules, 1950

Arrangement of Rules

G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules

Chapter X

SUPPLEMENTAL

98.Procedure in appeals

259

(1)

[An appeal presented under section 107 shall lie to the Chief Inspector, or in cases where the order appealed against is an order passed by the Chief Inspector, to the State Government and shall be in the form of memorandum setting forth concisely the grounds of objection to the order and bearing court fee stamp in accordance with Article 11 of Schedule II to the Court-fees Act, 1870, and shall be accompanied by a copy of the order appealed against certified correct and attested by the Inspector concerned and duly stamped under the same Act.]

(2)

Appointment of assessors - On receipt of the memorandum of appeal, the appellate authority shall, if it thinks fit or if the appellant has requested that the appeal should be heard with the aid of assessors, call upon the body declared under sub-rule (3) to be representative of the industry concerned, to appoint an assessor within a period of 14 days. If an assessor is nominated by such body, the appellate authority shall appoint a second assessor itself. It shall then fix a date for the hearing of the appeal and shall give due notice of such date to the appellant and to the Inspector whose order is appealed against, and shall call upon the two assessors to appear upon such date to assist in the hearing of the appeal

(3)

The appellant shall state in the memorandum presented under sub-rule (1) whether he is a member of one or more of the following bodies. The body empowered to appoint the assessor shall

(a) if the appellant is a member of one of such bodies, be that body;

(b) if he is a member of two such bodies, be the body which the appellant desires should appoint such assessor; and

(c) if the appellant is not a member of any of the aforesaid bodies or if he does not state in the memorandum which of such bodies he desires should appoint the assessor, be the body which the appellate authority considers as the best fined to represent the industry concerned:

(1) Employers' Federation of Southern India.

(2) Tamil Nadu State Board of the All-India Manufacturers' Organization.

(3) Tamil Nadu Small Scale Industries Association.

(4)

The South India Mill Owners' Association.

(5)

Tamil Nadu Mill Owners' Association.

(6)

The South India Sugar Mills Association.

(7)

The South India Tanners' and Dealers' Association.

(8)

The Southern India Skin and Hide Merchants Association. 260

(9)

[Association of Indian Engineering Industry.]

(10)

The United Planters' Association of Southern India.

(11)

The Planters' Association of Tamil Nadu.

(12)

The South India Textile Research Association.

(13)

Cement Service Bureau.

(14)

Madras Productivity Council.

(15)

The Coimbatore Productivity Council.

(16)

Tiruchirappalli Productivity Council.

(17)

Salem Productivity Council.

(18)

Madurai Productivity Council.

(19)

Tirunclvcli Productivity Council.

(20)

The Southern India Chamber of Commerce.

(21)

The Hindustan Chamber of Commerce.

(22)

The Madras Chamber of Commerce.

(23)

The Coimbatore Chamber of Commerce.

(24)

The Madura-Ramnad Chamber of Commerce.

(25)

The Tuticorin Chamber of Commerce.

(26)

Andhra Chamber of Commerce, Madras-1. 261

(27)

[Tamil Nadu Spinning Mills Association, Dindigul]

(4) Remuneration of assessorsAn assessor appointed in accordance with the provisions of sub-rules (2) and (3) shall receive for the hearing of the appeal, a fee to be fixed by the appellate authority, subject to a maximum of fifty rupees per diem. He shall also receive the actual travelling expenses. The fees and travelling expenses shall be paid to the assessor by Government; but where assessors have been appointed at the request of the appellant and the appeal has been decided wholly or partly against him, the appellate authority may direct that the fees and travelling expenses of the assessor shall be paid in whole or in part by the appellant.

99.Display of notices

An abstract of the following provisions of the Act and Rules shall be displayed in a conspicuous and convenient place at or near the main entrance in every factory:

100.Returns

The Manager of every factory shall furnish to the Inspector the following returns, namely:

(1)

A half-yearly return for the first half of every calendar year, in duplicate in Form No. 21 so as to reach the Inspector on or before the 31st July of the year. 262

(2)

[a combined annual return for every calendar year, in duplicate in Form No. 22 so as to reach the inspector on or before the 31st January of the following year.] 263 [* * *]

100-A.Rule 100-A

264 [In the case of a factory in which work is carried on only during certain period or periods of the year, the Manager shall, if so required by the State Government or if the State Government so directs, through the Chief Inspector, submit the annual or half-yearly returns mentioned in rule 100 within fifteen days after the close of that period or after the close of the last of those periods in the year as the case may be.

101.Service of Notice

The dispatch by post under registered cover of any notice or order shall be deemed sufficient service on the Occupier, Owner or Manager of a factory of such notice or order.

102.Information required by the Inspector

The Occupier, Owner or Manager of a factory shall furnish any information that an Inspector may require for the purpose of satisfying himself whether any provision of the Act has been complied with or whether any order of an Inspector has been duly carried out. Any demand by an Inspector for any such information, if made during the course of an inspection, shall be complied with forthwith if the information is available in the factory, or if made in writing, shall be complied with within seven days of receipt thereof.

102-A.Permissible levels of certain chemical substances in work environment

265 [Without prejudice to the requirements in any other provisions in the Act or the rules, requirements specified in this schedule shall apply to all factories.

103.Muster roll

The Manager of every factory shall maintain a muster-roll of all the workers employed in 268 the factory in Form No. 25 [and entries shall be made at the commencement of each period of work]

Provided that, if the daily attendance is noted in the Register of Adult Workers in Form No. 12, or the particulars required under this rule are noted in any other register, a separate muster-roll required under this rule need not be maintained.

269 [The Manager shall make it readily available for inspection to the inspector at all times during working hours, or when any work is being carried on in the factory and such muster roll shall be preserved for a period of three years after the last entry.]

103-A.Rule 103-A

In every factory in which all or any class of adult workers are exempted from all or any of the provisions of sections 51, 52, 54, 55 and 56 of the Act, a muster-roll shall be maintained in Form No. 25-A. This roll shall show the time of beginning and ending of each period of work during the day or night or both and shall be entered at the commencement of each period of work.

Further in the case of urgent repairs full particulars should be given of work done by each worker on each day of such repairs including periods of normal work, if any.

The Manager shall make it readily available for inspection during all working hours of the factory and such muster-roll shall be preserved for a period of three years after the last entry.

270

103-B.Service Card

(1)

The Manager of every factory shall maintain, in addition to maintaining a Muster- Roll in Form No. 25, a [service card] for each worker employed in the factory in Form No. 25B. 271

(2)

The [service card] after all entries are made therein for a calendar month, shall be issued to the worker concerned within a week after the expiry of the calendar 272 month to which the [service card] pertains and his acknowledgement obtained therefor. It shall be the property of the worker thereafter:

Provided that the Chief Inspector of Factories may, by order in writing exempt any factory or class of factories from the provisions of this rule, subject to such conditions as he may impose if he is satisfied that any alternative system followed therein is adequate to meet the requirements of this rule. 273

(3)

[The acknowledgements obtained from the workers for the issue of [service card] should be produced on demand to the Inspectors at the time of inspection.] 274 [103-C. Identity Card

(1) The Manager of every factory shall issue Photo Identity Card to each worker employed in the (sic.) Form No. 25-C.

(2) The Photo Identity Card shall be issued to the worker within one month from the date of entry into service and acknowledgement obtained therefor.

(3) The validity of the Photo Identity (sic.)shall be of permanent nature.

(4)

The acknowledgements obtained from the workers for having issued the photo identity card shall be produced on demand by the Inspector.].

275

104.Register of accidents and Dangerous Occurrence - * * *omitted

105.Maintenance of Inspection Book

The Manager of every factory shall maintain a bound inspection book containing the following particulars and shall produce it when so required by the Inspector or Certifying Surgeon:

(a) the exemptions granted or availed of by the factory in Form No. 28;

(b) the particulars of rooms in the factory in Form No. 29; and

(c) the particulars of lime-washing, colour-washing, painting, varnishing or tarring, as the case may be, in Form No. 7.

The book referred to in this rule shall be readily available for inspection during all working hours of the factory and such book shall be preserved for a period of three years after the last entry.

106.Rule 106

The particulars of measurements of each room in the factory in which workers are employed shall be entered in Form No. 29.

107.Rule 107

(1)

The maximum number of workers who may be employed in each workroom or work hall shall be posted prominently by means of a notice painted on the internal wall in each such room or hall. When determining the maximum number of persons permissible in addition to the breathing space required to be provided by section 16 276 277 (2), floor space of [2.3 square meters ’ in the case of existing factories and [3.3 square meters) in factories built after the commencement of the Act, shall also be provided for each worker working at any one time in the room, but such floor space shall be exclusive of the space occupied by machinery, fixtures and the materials in the room.

(2)

The Chief Inspector may, for reasons to be recorded in writing, relax the provisions of this rule to such extent as he may consider necessary, where in his opinion, such relaxation can be made having regard to the health of the persons employed in any room.

278

108.Intimation of intended closure of factory

(1)

The occupier or manager of every factory shall report to the Inspector any intended closure of the factory or any section or department thereof fifteen days before such closure:

Provided that in the event of a factory or any section or department thereof being forced to be closed for reasons beyond the control of the Occupier or the Manager, the report shall be sent as early as possible and at any rate within twenty-four hours of the closure.

(2)

(a) The report shall contain the following particulars, namely:

(i) the date of closure of the factory, department or section;

(ii) the reasons for the closure;

(iii) the number of workers on the register on the date of the report;

(iv) the number of workers likely to be affected by the closure; and

(v) the probable period of the closure; 279

(vi) [information as to the particulars and quantity of stored chemicals and action taken or proposed to be taken to ensure safety from these chemicals while in storage during such closure.)

(b) In the event of a factory, closing permanently and ceasing to exist or closing for over two months, such report shall be accompanied by the licence granted or renewed under the provisions of these rules.

(3)

In the event of the closure referred to in sub-rule (1) being in respect of a section or department of a factory, if that section or department should start working again, the Occupier or the Manager shall submit a report within 24 hours of its re-opening furnishing the following particulars, namely:

(i) the date of resumption of work;

(ii) the number of workers on the register on the date of resumption of work; and

(iii) the number of workers on the register on the date of closure now re- employed.

109.Power to cancel the licence and registration upon receipt of report

[The Chief Inspector may, on the receipt of a report in respect of any factory under sub rule (1) of rule 108, and after making such enquiry as he thinks fit, by order, cancel the licence and registration in respect of such factory with effect from such date as may be specified in the order.]

110.Preservation of records

280 [The records specified in column (I) of the Table below shall be preserved in the office of the Chief Inspector of Factories, Madras, for the periods specified in the corresponding entries in column (2) thereof: — THE TABLE Records Period of retention Applications presented under rules 4 and 7 of Five years from the date of disposals of the Tamil Nadu Factories Rules, 1950 the applications Counterfoils and licenses issued under the Five years from the date of issue of said rules licenses Challans Five years from the date of issue of licenses

111.Manner of destruction of records

After the period of retention specified in rule 110, the records shall be destroyed either by tearing or by burning in the presence of the head of the office.]

112.Language in the registers and records

281 [The registers and records required to be maintained in a factory under the provisions of the Act and these rules shall be either in English or in a language understood by the majority of the workers working in the factory.]

113.Exhibition of name board

282 [The name board of a factory shall be displayed conspicuously at the entrance of the factory premises. The name board shall be in Tamil and wherever other languages are also used, the version in such other languages shall be below the Tamil version. Appendix 1 Form of application for grant of Certificate of Competency to a person under sub-rule (I) of rule 2-A 1. Name 2. Date of Birth 3. Name of the Organization (if not self-employed) 4. Designation 5. Educational qualification (copies of testimonials to be attached).

6. Details of professional experience (In chronological order)

(1) Name of the organization

(2) Period of service

(3) Designation

(4) Area of responsibility.

7. Membership, if any, of professional bodies 8.

(i) Details of facilities (examination, testing etc.) at his disposal

(ii) arrangements for calibrating and maintaining the accuracy of these facilities 9. Purpose for which competency certificate is sought (section or sections of the Act should be stated).

10. Whether the applicant has been declare d as a competent person under any statute (if so, the details).

11. Any other relevant information.

12. Declaration by the applicant. I ……………... hereby declare that the information furnished above is true.

I undertake

(a) that in the event of any change in the facilities at my disposal (either addition or deletion) or my leaving the aforesaid organization, I will promptly inform the Chief Inspector;

(b) to maintain the facilities in good working order, calibrated periodically as per manufacturers' instructions or as per National Standards; and

(c) to fulfill and abide by all the conditions stipulated in the certificate of competency and instructions issued by the Chief inspector from time to time.

Place: Date: Signature of the applicant. DECLARATION BY THE INSTITUTION (IF EMPLOYED) I, certify that Shri ………. whose details are furnished above, is in our employment and nominate him on behalf of the organization for the purposes of being declared as an competent person under the Act. I also undertake that I will-

(a) notify the Chief Inspector in case the competent person leaves our employment;

(b) provide and maintain in good order all facilities at his disposal as mentioned above;

(c) notify the Chief Inspector any change in the facilities (either addition or deletion). Signature ………………… Designation …………….. Telephone No …………..

Date: Office Seal ………………..

FORM OF APPLICATION FOR GRANT OF CERTIFICATE OF COMPETENCY TO ANY INSTITUTION UNDER SUB-RULE (2) OF RULE 2-A 1. Name and full address of the organization 2. Organization ’ s status (specify whether Government, Autonomous Co-operative, Corporate or Private) 3. Purpose for which competency certificate is sought (specify Section (s) of the Act) 4. Whether the organization has been declared as competent person under this or any other statute. If so, give details 5. Particulars of persons employed and possessing qualification and experience as set out in Schedule annexed to rule 2-A 6. Details of facilities (relevant to item 3 above and arrangements made for their maintenance and periodic calibration 7. Any other relevant information 8. Declaration: I ……….. here by, on behalf of........... Certify that the details furnished above arc correct to the best of my knowledge. I undertake to --

(i) Maintain the facilities in good working order, calibrated periodically as per manufacturer's instructions or as per National Standards; and

(ii) to fulfill and abide by all the conditions stipulated in the certificate of competency and instructions issued by the Chief Inspector from time to time.

Place: Signature of Head of the Institution Date: or of the persons authorised to Sign on his behalf. FORM OF CERTIFICATE OF COMPETENCY ISSUED TO A PERSON OR AN INSTITUTION IN PURSUANCE TO RULE 2-A MADE UNDER SECTION 2(ca) I, ………. in exercise of the powers conferred on me under Section 2(ca) of the Factories Act and the rules made thereunder, hereby recognize (Name of the Institution) or Thiru (Name of the person) employed in (Name of the Organization) to be a competent person for the purpose of carrying out tests, examinations, inspection and certifications for such buildings, dangerous machinery, lifts and hoists, lifting machines and lifting tackles, confined space, ventilation system and process or plant and equipment as the case may be used Ma factory located in under sect ion and the rules made thereunder.

This certificate is valid from ………………. To ………………… This certificate is issued subject to the conditions stipulated thereunder

(i) Tests, examinations and inspections shall be carried out in accordance with the provisions of the Act and the rules made thereunder.

(ii) Tests, examination and inspections shall be carried out under direct supervision of the competent person or by a person so authorised by an institution recognised to be a competent person.

(iii) The certificate of competency issued in favour of a person shall stand cancelled if the person leaves the organization mentioned in his application.

(iv) The institution recognised as a competent person shall keep the Chief Inspector informed of the names, designations and qualifications of the person authorised by it to carry out tests, examinations and inspections.

(v)

(vi) (Strike out the words not applicable) Station:

Office Seal: Signature of the Chief Inspector Date:

Note: A separate certificate should be issued under each relevant section. A person or an institution may be recognised competent for the purpose of more than one section of the Act. THE SCHEDULE Section or rule under Qualification Sl. Facilities at his which competency is Experience for the purpose No command required recognised

(i) A minimum of ten years experience in the design of construction or testing or Rules made under Degree in Civil repairs of structures Section 6 and Section or Structural 1 112-Certificate of Engineering or

(ii) Knowledge of non-destructive Stability for buildings Equivalent testing, various codes of practices that are current and the effect of the vibrations and natural forces on the stability of the buildings; and

(iii) Ability to arrive at a reliable conclusion with regard to the safety of the structure or the building.

(i) A minimum of seven years experience In-

(a) design or operation or maintenance; or

(b) Testing, examination and inspection of relevant Gauges for machinery, their guards; measurement; safety devices and instruments for appliances. measurement of Degree in speed and any Electrical or (ii) He shall Rules made under other equipment Mechanical or 2 Section 21 (2) (a) be conversant with safety or device to Textile "Dangerous Machines " devices and their proper determine the Engineering or functioning safety in the use of Equivalent

(b) be able to identify defects the dangerous and any other cause machines. leading to failure; and

(c) have ability to arrive at a reliable conclusion with regard to proper functioning of safety device and appliance and machine guard. Facilities for load

(i) A minimum experience of testing, testing seven years in tensile gauges;

(a) Design or erection or A degree in equipment/gadgets maintenance; or Electrical for measurement Section 28 Lifts and and/or (b) Inspection and test and any other 3 Hoists Mechanical procedures; of lifts and equipment Engineering or hoists. required for its equivalent. determining the

(ii) He shall be safe working

(a) Conversant with relevant conditions of codes of practices and test Hoists and Lifts. procedures that are current;

(b) conversant with other statutory requirements covering the safety of the Hoists and Lifts; and

(c) able to identify defects and arrive at a reliable conclusion with regard to the safety of Hoists and Lifts.

(i) A minimum experience of seven years in

(a) Design or erection or maintenance; or

(b) testing, examination and inspection, of lifting machinery, chains, ropes and lifting tackles.

(ii) He shall be Facilities for load testing, tensile

(a) conversant with the testing, heat relevant codes of practices treatment, and test procedures that equipment, gadget Degree in are current for measurement.

Section 29-Lifting Mechanical or

(b) conversant with fracture Gauges and such 4 Machinery and Lifting Metallurgical mechanics and metallurgy other equipment to Tackle Engineering or of the material of determine the safe its equivalent. construction working conditions of the lifting

(c) conversant with heat machinery tackle. treatment; stress relieving techniques as applicable to stress boaring components and parts of lifting machinery and lifting tackles; and

(d) capable of identifying defects and arriving at a reliable conclusion with regard to the safety of lifting machinery, chains, ropes and lifting tackles.

(i) A minimum of seven years in collection and analysis of environmental samples and calibration of monitoring equipment; Meters,

(ii) He shall instruments and

(i) Section 36 - Pre-

(a) be conversant with the devices duly cautions against hazardous properties of calibrated and Master's degree dangerous fumes. Chemicals and their certified for in Chemistry or permissible limit values;

(ii) Rules made under carrying out the 5 a degree in Sections 41 and Chemical (b) be conversant with the tests and 112 concerning Engineering current techniques of certification of ship-building and sampling and analysis of safety in working in ship repairs. the environmental confined spaces. contaminants; and

(c) be able to arrive at a reliable conclusion as regards the safety in respect of entering and carrying out hot work Ventilation system Facilities for testing as required under the ventilation

(i) A minimum of seven years in various Schedules system, the design, fabrication, framed under instruments and installation. testing or Section 87, such as gauges for testing ventilation system and Schedules on the effectiveness of systems used for extraction the extraction and collection of dusts,

(i) Grinding or Degree in systems for dusts, fumes and vapors and other glazing of metals Mechanical or vapors a n d fumes, ancillary equipment; and processes Electrical; and any other 6 incidental Engineering or (ii) He shall be conversant with equipment needed thereto; Equivalent. relevant codes of practice for determining the and tests procedures that are

(ii) Cleaning or efficiency and current in respect of smoothing, adequacy of these ventilation and extraction roughening, etc., systems. He shall system for fumes, and shall of articles by a have the assistance be able to arrive at a reliable jet of sand, of a suitable conclusion with regard to metal shot or qualified technical effectiveness of the system grit, or other person who can abrasive come to a propelled by a reasonable blast of conclusion as to compressed air the adequacy of or steam the system.

(iii) Handling and processing of asbestos;

(iv) Manufacture of Rayon by Viscose process; and;

(v) Foundry operations A minimum experience of Bachelor's seven years in testing, Guages for 283 degree in [Rule 61-A- examination and inspection measurement and Mechanical Testing and of safety belts and shall be instruments for 7 Engineering or Examination of conversant with relevant magnifying. Electrical Safety belts standards of industrial Safety Engineering or Belts and harnesses and their its equivalent. specifications

(i) A minimum experience of seven years in design or

(i) Meters, maintenance or instruments operation or testing and devices and examination of duly ovens and driers. calibrated Bachelor's

(ii) Knowledge of and certified degree in Rule 61-B-Exa- relevant codes of for carrying Mechanical mination and practices and test out tests and 8 Engineering or Testing of ovens procedures that are certification Electrical and driers. current. of safety.

Engineering or its equivalent

(iii) Conversant with (ii) Facilities for statutory carrying out requirements non- regarding the safety destructive of ovens and driers. test

(iv) Conversant with safety devices and their proper functioning to ensure the safety of ovens and driers

(v) Be able to identify defects and other causes leading to failure of ovens and driers

(vi) Ability to arrive at a reliable conclusion as to the safety of ovensa and driers.

Bachelor's Facilities for degree in pressure testing Mechanical A minimum experience of seven Engineering or

(i) Rule 61-P (i) sub- years in design or operation or Electrical rule (16) Testing Laboratory maintenance or testing and Engineering or of heater coil facilities to test examination of thermic fluid heater its equivalent 9 acidity, suspended

(ii) Sub-rule (18) A minimum experience of seven Master's degree matter, ash Testing of years in testing of thermic fluids in Chemistry or contents, viscosity Thermic fluid. a Bachelors ’ and flash point of degree on thermic fluid. Chemical Engineering

(i) A minimum experience of seven years in Meters, Bachelor's

(a) operation of maintenance; (or) instruments, degree in devices and other Chemical (b) testing, examination and appropriate Engineering or inspection of the process Rule 95, Schedule facilities duly Technology or instruments and safety devices XVI, Part II, Pam calibrated and Instrumentation 10 7, Examination of (ii) Must be thoroughly conversant certified for Engineering or instruments and with the relevant codes of carrying out the Techno-logy or safety devices practices and test procedures tests of process Mechanical that are current, and be able to instruments and Engineering. arrive at a reliable conclusion as safety devices. regards the reliability and proper functioning of the process instruments and safety devices

(i) A minimum experience of seven years in

(a) the operation or maintenance of process plant in a chemical industry: (or)

(b) testing examination and inspection or plant equipment and machinery in Non-destructive Bachelor's a chemical process industry testing equipment degree in

(ii) He shall- such as ultrasonic Rule 95, Schedule Chemical thickness gauging

(a) Be thoroughly conversant XVI. Part II, Para Engineering or instrument and with the process of hazard I5, Testing, Technology or 11 flaw detector involved;

Examination and Instrumentation hydraulic pump repair of plants Engineering or (b) Be able to identify the portable toxic and and equipments Techno-logy or defects and other causes flammable gas Mechanical which may be lead to failure detectors (Multi Engineering of the plant equipment and gas detector) machinery in chemical process industry

(c) Have ability to arrive at a reliable conclusion with regard to the safety and integrity of the plant equipment and machinery

(i) A minimum experience of seven years in collection and analysis of environmental samples and calibration of monitoring equipments. Portable Multi gas Master ’ s degree Rule 95, Schedule Detectors as

(ii) He shall in Chemistry or XVI. Part II, Para applicable to the a Bachelor ’ s

(a) Be conversant with the 12 I8, Entry into or Chemical gases or degree in hazardous properties of work in confined fumes in the Chemical chemicals and their space confined space, Engineering permissible limit values. oxygen level meter.

(b) Be conversant with the current techniques of sampling and analysis of contaminants; and

(c) Be able to arrive at a reliable conclusion as regards the safety in respect of entering the confined space and carrying out hot work or other maintenance work.

(i) A minimum experience of seven years in

(a) Operation or maintenance of process plant in a chemical industry; (or)

(b) Testing examination and inspection of plant and equipment made from reinforced plastics in a chemical industry Bachelor's

(ii) He shall degree in Rule 95, Schedule

(a) Be thoroughly knowledgeable Plastic Non-destructive XVI. Part V, Para about the Indian Standards or Technology or testing equipment 5, Testing and any other National Standards as Chemical such as ultrasonic examination of regards the plant and 13 Engineering or thickness gauging plant and equipment made of reinforced Techno logy or equipment, flaw equipment made plastics Mechanical detector and from reinforced Engineering or (b) Be fully conversant with the hydraulic pump.

plastics. Electrical chemical compatibility of Engineering reinforce plastics;

(c) Be able to identify the defects and other caused which may lead to failure of the plant and equipment made of reinforced plastics

(d) Have ability to arrive at a reliable conclusion with regard to the safety and integrity of the plant and equipment made of reinforced plastics.

Sub. For “ degrees ", by Go. Ms. No. 127, Labour and Employment (M-2) dated 31st August, 2005 (deemed to have come into effect from 9th November, 2005) Sub. for “ Fahrenheit Scale ” and Omitted by G.O. Ms. No. 1523, Labour and Employment, dated the 10th July,1980 Ins by G.O. Ms. No. 113, Labour and Employment (M2), dated the 23rd April Rules and 4, substituted by GO. Ms. No. 866, Industries, Labour and Co-operation, dated the 13th February, 1961 Subs. by GO. Ms. No. 1523, Labour and Employment, dated the 10th July, 1980 Sub-rule (I), re-numbered as (I) (a), by GO. Ms. No. 2013, Labour and Employment, dated the 30th August, 1980 Subs. by GO. Ms. No. 2844, Labour and Employment, dated the 17th December, 1980, for" Chief Inspector" Ins. by GO. No. 2013, Labour and Employment, dated the 30th August, 1980 Ins. by GO. No. 2013, Labour and Employment, dated the 30th August, 1980, for "Application for such permission shall be made in Form No.1 in triplicate " Clause (a), substituted by GO. Ms. No. 3681, Industries, Labour and Housing (Labour), dated the 31st October, 1969. Proviso to clause (b) initially added by GO. Ms. No. 3681, Industries, Labour and Housing (Labour), dated the 3Ist October. 1969, subsequently omitted by GO. Ms. No. 1523, Labour and Employment, dated the 10th July, 1980 Clause (c), omitted by notification Clause " (d)", inserted after the initial clause" (d)" along with its contents re-lettered as clause (e) ", by GO. MS. No. 3681. Industries, Labour and Housing (Labour), dated the 31st October, 1969 Subs. by GO. Ms. 1462, Labour, dated the 14th July, 1987, for" Director of Health Services and Family Planning, Madras Re-lettered for the then existing clause " (d)", by GO. Ms. No. 3681, Industries. Labour and Housing (Labour), dated the 31st October, 1969 Subs. by go. Ms. No. 2844, Labour and Employment, dated the 17th December, 1980, for "Chief Inspector". Added by GO. Ms. No. 148, Labour and Employment (M-2), dated the 12th October, 2009 Subs. by GO. Ms. No. 2844, Labour and Employment, dated the 17th December, 1980, for" Chief Inspector " Subs. by GO. Ms. No. 2844, Labour and Employment, dated the 17th December, 1980, for" Chief Inspector " Subs. by GO. Ms. No. 2844, Labour and Employment, dated the 17th December, 1980, for" Chief Inspector " Subs. by GO. Ms. No. 150, Labour and Employment (M-II), dated the 14th July, 1993, for "by a treasury receipt" Subs. by GO. Ms. No. 149. Labour and Employment (M-2). dated the 25th July, 1995, for "crossed demand" Ins. by GO. Ms. No. 150, Labour and Employment (M-II), dated the 14th July, 1993 Subs. by GO. Ms. No. 24, Labour and Employment (M-2), dated the 12th February, 1993, for" rule 109" Subs. by O.O. Ms. No.2844 Lab. & Emp.. dated 17-12-1980 Subs. by O.O. Ms. No.2844 Lab. & Emp.. dated 17-12-1980 Subs. by O.O. Ms. No.2844 Lab. & Emp.. dated 17-12-1980 Subs. by G.O. Ms. No.150, Lab & Emp. (M-II), dated 14-7-1993 Subs. by G.O. Ms. No.74. Lab. & Emp (M-11), dated 164-1993 Ins. by O.O. Ms. No.109, Labour. dated the 23rd January, 1985 Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Subs. by G.O. Ms. No.I50. Lab. & (M-11), dated 14.7-1993 Omitted by G.O. Ms. No.149, Lab. & Emp. (M-II) dated 25-7-1995 Subs. Ibid Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Subs. by (1.0. Ms. No.2844, Lab. & Emp, dated 1,7.12-1980 Ins. by G.0.. Ms. No.1280. Lab. & Emp. (M-11), dated the 17th June, 1981 Subs. by G.O. Ms. No.150, Lab. & Emp. (M-11), dated the 14th July, 1993 Ins. by G.O. Ms. No.24, Lab. & FAIT. (M-11), dated the 12th February, 1993 Ins. by G.O. Ms. No.150. Lab. & Emp. (M-11), dated the 14th July, 1997 Subs. by G.O. Ms. No. 2844 Lab. & Emp dated the 17th member, 1980 Subs. by G.O. Ms. No. 2844 Lab. & Emp dated the 17th member, 1980 Subs. By G.O. Ms. No. 241, Lab. & Emp., dated the 13th September, 1991 Subs. by G.O. Ms. No. 2844 Lab. & Emp dated the 17th member, 1980 Subs. by G.O. Ms. No. 2844 Lab. & Emp dated the 17th member, 1980 Subs. by G.O. Ms. No. 2844 Lab. & Emp dated the 17th member, 1980 Subs. by G.O. Ms. No. 2844, Lab & Emp 17.12.1980 Subs, by G.O. Ms. No. 241. Lab. & Emp. 13-9-1991 Subs. by G.O. Ms. No. I50, Lab. & Emp. (M-II).14-7-1993 lns. by G.O. Ms. No. 150, Lab. & Emp. (M-11). 14.7.1993 Omitted by G.O. Ms. No.149. Lab & Emp (M-II) 25.7.1995 lns. by G.O. Ms. No. 150, Lab. & Emp. (M-11). 14.7.1993 Subs. by G.O. Ms. No. 2844, Lab & Emp 17.12.1980 Subs. by G.O. Ms. No. 2844, Lab & Emp, dated the 17.12.1980 Subs by G.O Ms.No.133, Lab & Emp, dated the 23rd April 1991 Ins by G.O Ms.No 387, Lab & Emp, dated the 17th May 1977 Subs. by G.O. MS. No.2562. Lab. & Emp, dated 16th November 1981 Ins. by G.O. Ms.No, 133, Lab & Emp, dated the 23rd April 1991 Ins. by S.R.O. A.930 of 1971 Subs. by G.O. Ms. No. 2223, Labour and Employment, 6th October 1988 Subs. by G.O. Ms: No. 387, Labour and Employment, dated the 28th April, 1976 Subs. by G.O. Ms. No. 387, Labour and Employment, dated the 28th April. 1976 Subs. by GO. Ms. No 127. Labour and Employment (M-2), dated 31-8-2005 Subs. By G.O. Ms.No.387, Labour and Employment, dated the 28th April, 1976 Subs. by GO. Ms. No. 127. Labour and Employment (M-2) dated the 31-8-2005 Subs. by GO. Ms. No. 127. Labour and Employment (M-2) dated the 31-8-2005 Subs. by GO. Ms. No. 127. Labour and Employment (M-2) dated the 31-8-2005 Subs. by G.O. PAL No. 359, Labour and Employment, dated the 2nd May, 1978 Subs. by G.O. PAL No. 359, Labour and Employment, dated the 2nd May, 1978 Subs. by G.O. PAL No. 359, Labour and Employment, dated the 2nd May, 1978 Subs. by G.O. PAL No. 359, Labour and Employment, dated the 2nd May, 1978 Added by G 0. Ms No.2223, Labour and Employment, dated the 6th October,1988 Ins by G.O.Ms. No. 1569, Labour, dated the 1st August, 1985 Subs. by G.O. Ms. No. 1250, Labour and Employment, 26th June, 1989 Subs. by G.O.Ms. No. 366, Labour, dated the 23rd February. I985 Re-cumbered by G.O. Ms. No. 1527. Labour, 20th July. 1988 Ins. ibid Ins. by C.O. Ms. No. 35. Labour and Employment, dated the 19th January, 1978 Heading subs. by G.O. Ms. No. 3286, Labour, dated the 24th December, 1983 Subs. by G.O. Ms. No. 1872, Labour and Employment, dated the 8th November, 1979 Added by G.O. Ms No. 1527, labour, dated the 20th July, 1988 Added by G.O. Ms. No. 1527, Labour, dated the 20th July, 1988 Added by G O. Ms No 154. Labour and employment (M2), dated the 1st June 2004 Ins. by GO. Ms. No. 40. Labour and Employment (M-2), dated the 29th March 2006 Subs. by GO. Ms. No. 248. Labour & Employment, dated the 26th March, 1976 Subs, by S.R.O. A-No. 90/77, dated the 23rd February. 1977 Sub. by G.O. Ms. No. 210, Labour and Employment, dated the 18th March. 1978 Sub. for " an unfired ". by G.O.Ms. No. 1523. Labour and Employment dated the 10th July. 1980 Sub. by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1985 Cl. (a) omitted by G.0. Ms. No. 572. Labour. dated the 18th March. 1985 Sub. for "competent person", by G.O.Ms. No. 2547, Labour, dated the 3rd December. 1984 Sub. for "competent person". by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 Sub. for "competent person". by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 Sub. for "competent person". by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 100 Sub. for "competent person". by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 101 Sub. for "competent person". by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 102 Sub. for "competent person". by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 103 Subs. for "competent person". ibid.

104 “ Sub. for" competent person" by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 105 “ Sub. for" competent person" by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 106 “ Sub. for" competent person" by G.O. Ms. No. 2547. Labour, dated the 3rd December. 1984 107 Ins. by GO. Ms. No. 204, Labour and Employment (M-2), dated 23rd July, 2004 108 Certain words omitted by GO. Ms. No. 109, Labour and Employment (M-2), dated the 10th September. 2008 109 Subs. By G.O. Ms.No 53, L&E (M-2), dated the 12th April, 2012 110 Subs, by GO. Ms. No.109, L&E (M-2), dated the 10th September, 2008.

111 Amended by G.O. Ms. No. 564. Labour & Employment, dated the 4th August. 1977 112 Sub. by G.O. Ms. No. 368. Labour, dated the 23rd February, 1985 113 Ins. By G.O Ms. No. 1093. Lab. & Emp. (M-11). dated the 23rd December 1976.

114 Subs. by GO. Ms. No. 1093, Labour and Employment (M-II) dated 23.12.1976 115 Subs. by G.O. Ms. No. 1527, Labour, 20th July, 1988 116 Subs for “ protection against lightning ” by GO.MS.No.121, Labour & Employment, (M-2), dated 31st July 2012 117 Subs by GO. Ms.No.121, Labour & Employment (m-2), dated 31st July 2012.

118 Subs. by GO. Ms. No. 121, Labour & Employment (M-2), dated 31st July, 2012 119 Added by GO. Ms. No. 121, Labour & Employment (M-2), dated 31st July, 2012.

120 Existing Schedule-I, substituted by G.O. Ms. No. 121, Labour & Employment (M-2), dated 31st July, 2012 121 Subs. by G.O. Ms. No. 1074, dated the 14th September, 1978 122 Omitted by GO. Ms. No. 141, Lab. and Emit (M-2), dated 26-10-2005 123 Subs. by GO. Ms. No. 1717, Labour, dated the 2nd September. 1986 124 Subs. by GO Ms. No. 895. Labour and Employment. dated the 16th May, 1989 125 Originally Ins. by G.O. Ms. No. 110, Labour and Employment, dated the 8th December, 1978 126 Subs. by G.O. Ms. No. 3032, Labour, dated the 15th November, 1983 127 Ins by G.O Ms. No. 1106, Labour and Employment, (M-II), dated the 28th December, 1976 128 Ins. by G.O. Ms. No. 988 Labour, dated the 2nd June, 1986 129 Subs.by G.O. Ms.No 121, Labour and Employment (M-2), dated the 31st July, 2012 130 Ins by G.O. Ms. No. 109 Labour, dated the 23rd January. 1985 131 Subs by G.O. Ms. No. 133, Labour& Employed, dated 23rd April, 1991 132 Added by G.O. Ms. No. 2223, Labour & Employment, dated the October, 1988 133 Ins. by G.O. Ms. No. 1527. Labour, dated the 20th July, 1988 134 Added by G.O. Ms. No. 518, Labour & Employment, dated the 15th March, 1989 135 See Errata dated 26th May, 1992 136 Inserted by GO. Ms. No. 40, Labour and Employment (M-2), dated the 29th March 2006 137 Added by GO. Ms, No. 127, Labour and Employment (M-2), dated 31st August, 2005 (with effect from 9th November, 2005 138 Rules 62-B to 62-T, inserted by G.0. Ms. No. 133, Labour and Employment (M-2), dated the 23rd April, 1991.

139 Subs. by G.O.M.s No. 222. Labour and Employment, dated the 21st November, 1995 140 Subs by G.O. Ms. No.222. Labour and Employment, dated the 21st November, 1995 141 Subs. by G.O. Ms. No. 222. Labour and Employment, dated the 21st November, 1995 142 Subs. by G.O. Ms. No. 222, Labour and Employment, dated the 21st November, 1995 143 Subs. by G.O. Ms. No. 150 (Labour and Employment) dated the 14th July, 1993 144 Subs. By G.O. Ms No.150, Lab. & Emp. (M-II). Dated the 14th July. 1993 145 Ins. by G.O. Ms. No. 2013. Lab & Emp, dated the 30th August, 1980 146 Ins. by G.O, Labour & Employment, dated the 23rd January, 1985 147 Subs, by G.O. Ms. No. 2013, Labour and Employment, dated the 30th August,1980 148 Subs. by G.O. Ms. No. 169. Labour, dated the 23rd January, 1985 149 Ins by GO. Ms. No 1568. Labour, 1st August. 1985 150 Subs. by GO. Ms. No 53. Labour and Employment.(M-2), 12th April, 2012 151 Added by G.O. Ms No 127, Labour and Employment (M-2), dated 31-8-2005.

152 Ins. By G.O. Ms.No.2013, Labour and Employment, August, 1980.

153 Now the Tamil Nadu Co-operative Societies Act, 1983 154 Subs. by G.O. Ms. No. 2013, Labour and Employment, dated the 30th August, 1980 155 Ins. by G.O. Ms. No. 109, Labour, dated the 23rd January, 1985 156 Ins. by G.O. Ms. No. 2743, Labour, 27th December, 1984 157 Subs. by G.O. Ms. No. 2013, Labour and Employment, dated the 30th August, 1980, for "fifty women workers" 158 Subs, by G.O.Ms. No. 2013, Labour and Employment, dated the 30th August 1980 159 Ins. by G.O. Ms. No. 1536, Lab. & Bop. dated the 19th September, 1979 160 Subs. by G.O. Ms.No.109, Labour, dated the 23rd January, 1985 161 Ins. by G.O. Ms. No. 116, Lab. & Emp. (M-II) dated the 28th June, 1994 162 Subs. By G.O.Ms.121, Labour and E,mployment (M-2), dated the 31st July,2012.

163 Subs. For “ Register of adult workers ”, by G.O. Ms. No.121, Labour and Employment (M-2), dated the 31st July, 2012.

164 Inserted (sic) by GO.Ms.217, Labour Employment(M-2), dated the 29th July, 2004 (for Gazette extract, see Digest of Labour Cases, 2005 at P.14) Publisher's note: Prior to this amendment, Rules to were last amended tide G.O. Ms. No. 156. Labour and Employment. dated 3rd August. 1994 (for Gazette extract see 1994 Digest of Labour Cases at p. 871 and prior to that it was substituted by G.O. Ms. No. 2535. Labour.

24th November. 1987 (for Gazette extract sec 1987 Digest of Labour Cases at p.191)] 165 Ins. by G.O. Ms. No. 367. Labour, dated the 23rd February. 1985. (for Gazette extract see 1985 Digest of Labour Cases at p.

166 Subs, by G.O Ms. No, 24, Lab.& Emp (M-2), dated, the 12th February. 1993 167 Ins. by G.O. Ms. No. 121, Lab & Emp.(M-2), dated the 31st July, 2012 168 Ins. By G.O. Ms. No. 644, Labour and Employment, dated 25th march, 1982 169 Subs. By G.O. Ms. No.53, Lab & Emp (M-2), dated the 12th April, 2012 170 Renumbered by G.O. Ms. No. 644, Lab and Emp., dated 25th March, 1982.

171 Subs. by GO. Ms. No. 2347, Lab. and Emp, dated the 27th October, 1988 172 Item 7, substituted by GO. Ms. No. 3744, Industries, Labour and Co-operation (Labour), dated the 29th July, 1960 173 Items and 16, added by GO. Ms. No. 2501, Industries, Labour and Co-operation (Labour), dated the 7th May, 1962 174 Item 17, added by GO. Ms. No. 5135, Industries, Labour and Co-operation (Labour), dated the 25th October, 1963 175 Item18, added by GO. Ms. No. 3461. Industries, Labour and Housing (Labour), dated the 7th October, 1968 176 Items to 21, added by GO. Ms. No. 1195, L& E. dated the 27th November. 1974 177 Item 22, added by GO. Ms. No. 1222, L & E, dated the 10th December, 1974 178 Item 23, added by GO. Ms. No. 680. L & E, dated the 20th July, 1976 179 Item 24, added by GO. Ms. No. 41, L & E, dated the 21st January. 1976 180 Item 25, added by GO. Ms. No. 643. L & E. dated the 24th July, 1975 181 Item 26. added by GO. Ms. No. 314, L & E. dated the 17th April, 1976 182 Item 27. added by GO. Ms. No. 906, L & E, dated the 19th November, 1975 183 Items to 31, added by GO. Ms. No. 185, L & E, dated the 1st March. 1988 184 Subs. by GO. Ms. No. 110, L & E. (M-2), dated the 16th September, 2008, for “ 31. Highly flammable liquids and flammable compressed gases" 185 Item 32, added by GO. Ms. No. 255. L & E (M-2). dated the 25th October,2013 186 Ins. by GO. Ms. No. 644, L &E, dated the 25th March. 1982 187 Subs. by GO. Ms. No. 153, L & E (M-2), dated the 12th April,2012 188 Added by G.O. Ms. No. 1523, Labour and Employment, dated 10th July 1980 189 Subs, by G.O. Ms. No. 3310, Labour, dated 28th December, 1983 190 Added by G.O. MS No. 366, Labour. dated 23rd February, 1985 191 Ins by G.O. Ms. No. 1852, Labour and Employment, dated 31st August 1988 192 Ins. by G.O. Ms. No. 1252, Labour and Employment, dated the 19th October,1978 193 Subs. by. G.O. Ms. No. 1852 Labour and Employment, dated 31st August, 1988 194 Omitted by G O Ms No 2223 Labour and Employment, dated the 6th October, 1988 195 Subs. vide G.O. Ms. No. 2223, Labour and Employment, dated the 6th October,1988 196 Omitted vide G.O. Ms. No 2223 labour and Employment, dated the 6th October, 1988 197 Subs. vide G.O. Ms-No.2223, Labour and Employment, dated the 6th October,1988 198 Subs. by G.O. Ms. No. 365, Labour and Employment, dated the 10th May, 1977 199 Ins. vide G.O. Ms. No.2223. Labour and Employment, dated the 6th October,1988 200 Subs. vide G O Ms No 2223, Labour and Employment, dated the 6th October, 1988 201 Subs. vide G O Ms No 2223, Labour and Employment, dated the 6th October, 1988 202 Subs. by G.O. Ms. No.1195, Labour and Employment, dated the 27th November, 1974.

203 Subs. by G.O. Ms. No. 579, Labour and Employment, dated the 24th June, 1976 204 Ins. vide G.O. Ms. No 2223, Labour and Employment, dated the 6th October,1988 205 Subs. by G.O. Ms. No. 1069, dated the 29th October, 1974 206 Subs. by G. O. Ms. No 1069, dated the 29th October, 1974 207 Subs. vide G.O. Ms. No. 2223, Labour and Employment, dated the 6th October, 1988 208 Subs. vide G.O. Ms. No. 2223, L& E, dated the 6th October,1988 209 Subs. vide G.O. Ms. No. 2223, L E, dated the 6th October, 1988 210 Subs. vide G.O. Ms. No. 2223, L & E, dated the 6th October. 1988 211 Subs. by G.G. Ms. No. 518, Labour and Employment, data, the 15th April,1989 212 Subs. by G.O. Ms. No. 547, dated the 8th July, 1974 213 Subs. by G.O. Ms. No. 547, dated the 8th July.1974 214 Omitted by G.O. Ms. No.547, dated the 8th July, 1974 215 Subs. by G.O. Ms. No.2223. L & E, dated the 6th October, 1988.

216 Subs. by G.0. Ms. No. 1717, Labour, dated the 2nd September, 1986 217 Added by G.O. Ms. No. 46, L & E (M-2), dated the 28th April, 2006 218 Subs. by GO. Ms. No. 2223, L & E, dated the 6th October. 1988 219 Subs for the expression “ Form 27-A ”, by GO.Ms, 121, Labour & Employment (M-2), dated the 31st July, 2012 220 Added by GO. Ms. No. 46, Labour and Employment (M-2), dated 28th April 2006 221 Subs, by G.O. Ms. No,1717, labour, dated the 2nd September, 1986 222 Subs. vide G.O. Ms. No. 2223, L.& E, dated the 6th October, 1988 223 Re-lettered by G.O. Ms. No. 1278, Labour, dated the I3th June. 1984 224 Re-lettered by G.O. Ms. No. 1278, Labour, dated the I3th June. 1984 225 Re-lettered by G.O. Ms. No. 1278, Labour, dated the I3th June. 1984 226 Added by GO. Ms. No. 680, Labour and Employment, dated the 20th July, 1976 227 The heading" Process of Extracting Oils and Fats from Vegetable and Animal Sources in Solvent Extraction Plants " substituted by GO. Ms.

No. 127, Labour and Employment (M-2), dated the 31st August 2005 228 The words " from vegetables and animal sources omitted by GO. Ms. No. 127, Labour and Employment (M-2), dated the 31st August, 2005 229 Subs. by G.O. Ms. No. 1523, Labour and Employment, dated the 10th July, 1980 230 Ins. by G.0. Ms. No. 572, Labour, dated the 18th March, 1985 231 Ins. by G.O.Ms. No 1523, Labour and Employment, dated the 10th July, 1980 232 Subs. by G.O. Ms. No. 3310, Labour, dated the 28th December, 1983 233 Subs. by G.0.145. No., 2742. Labour, dated the 27th December, 1984 234 Subs. by G.O. Ms. No. 28, Labour and Employment (M-2), dated' 18th March. 1997 (w.e.f. 2nd April. 1997) 235 The word “ and ” omitted by G.O. Ms. No 24, L & E (M-2), 12th February 1993.

236 Subs. By G.O. Ms. No.2457, Labour, dated the 22nd November 1993 237 Ins. By G.O Ms.24.,Lab and Emp (M-2), dated the 12th February 1993 238 Ins by GO.Ms. No.16, Labour and Employment, dated the 3rd March 1997.

239 Subs. By G.O. Ms No. 24, Lab and Emp (M-2), dated the 12th February 1993.

240 Ins. By GO.Ms. No.130,Lab and Emp (M-2), dated the 11th September, 2012.

241 Subs. By G.O. Ms. No 2223. L & E, dated the 6th October, 1988 242 Added by G.O. Ms. No. 314, L & E, dated the 17th April, 1976 243 Subs. by G.O. Ms. No. 288, labour and Employment, dated the 12th April, 1978 244 Subs. by G.O. Ms. No. 288, Labour and Employment, dated the 12th April, 1978 245 Ins. by G.O.Ms. No.366. Labour, dated the 23rd February, 1985 246 Re-lettered by G.O. Ms. No. 366, Labour, dated the 23rd Februarys 1985 247 Re-lettered by G.O. Ms. No. 366, Labour, dated the 23rd Februarys 1985 248 Re-lettered by G.O. Ms. No. 366, Labour, dated the 23rd Februarys 1985 249 Subs. vide O.O. Ms. No. ma. 1. & E. dated the 6th October. 1988 250 Added by G.O. Ms. No,366, Labour, dated the 23rd February,1985 251 Ins. by G.O. Ms. No.885, Labour, dated the 8th May, 1986 252 Omitted by G.O Ms No 2223 L & E., dated the 6th October, 1988 253 Subs. by G.O. MS No. 2223, Labour and Employment, dated the 6th October, 1988.

254 Ins. by G.O. Ms. No.1717. Labour, dated the 2nd September, 1986 255 Added by GO. Ms. No. 1852, Labour and Employment, dated the 31st August, 1988 256 Subs. by GO. Ms. No. 110, Labour and Employment (M-2), dated the 16th September, 2008 257 Originally inserted by G.O MS No 1852, L & E, dated the 31st august 1988 and subsequently by GO. Ms. No.255, L&E (M2), dated the 25th October 2013.

258 Sub for “ Form ”, by GO. MS.No 121, L & E (M-2) dated the 31st July, 2012.

259 Subs. by G.O. Ms. No.1479, Labour, 6th July. 1988 260 Subs. By GO. MS. No 81, Labour and Employment (M-2), dated 19-02-2013 261 Added by GO. Ms. No 119. Labour and Employment (M-2). dated 9-8-2005 262 Subs. by G.O. Ms. No. 257, Labour and Employment (M-2). dated the 16th August, 2004 263 Omitted by G.O. Ms. No. 698. Labour and Employment, dated the 11th August. 1975 264 Renumbered ibid 265 Ins. By G.O.Ms.No.366, Labour, dated the 23rd February, 1985 266 Subs. By GO.Ms. No.196, L&E (M-2), dated the 22nd august 2013.

267 Subs. By GO. Ms. No. 196, L&E (M-2), dated the 22nd august 2013.

268 Subs. GO. Ms. No. 24, Labour and Employment (M-2), dated the 12th February 1993 269 Subs. GO. Ms. No. 1906, Labour. dated the 6th September, 1985 270 Ins. by notification 271 Subs. for" Time card ", by GO. Ms. No. 127, Labour and Employment (M-2), dated the 31st August, 2005 272 Subs. by GO. Ms. No. 127. Labour and Employment (M-2), dated the 31st August, 2005. for "Time card " 273 Ins. by GO. Ms. No. 291, Labour, dated the 3rd February, 1984 274 Ins. by GO. Ms. No. 205, Labour and Employment (M-2), dated the 4th October, 2010 275 Rule 104, omitted by GO. MS. No 121, L& E (M-2), dated the 31st July 2012. Prior to this rule 104 was substituted by GO.Ms.No.698, Labour and Employment, dated the 11th August, 1975 276 Subs. for " square feet " and " square feet " respectively, by GO. Ms. No. 6751, Industry. Labour and Co-operation (Labour), dated the 30th November, 1961.

277 Subs. for " square feet " and " square feet " respectively, by GO. Ms. No. 6751, Industry. Labour and Co-operation (Labour), dated the 30th November, 1961.

278 For Rule 108, Rules 108 and 109, substituted by GO. Ms. No. 866, Industry, Labour and Co-operation, dated the 13th February, 1961 279 Ins. by GO. Ms. No. 1852. Labour and Employment. dated the 31st August, 1988 280 Rules 110 and 111, added by GO. Ms. No. 6586, Industries, Labour and Co-operation (Labour), dated the 18th November. 1961 281 Rule 112, added by GO. Ms. No. 2385, Industries, Labour and Co-operation (Labour), dated the 27th April. 1964 282 Rule 113, added by GO. Ms. No. 1310, Labour and Employment, dated the 22nd June, 1981 283 Added by GO. Ms. No. 105, Labour and Employment (M-2), dated the 16th June, 2010.