The Tamil Nadu Factories Rules, 1950
Arrangement of Rules
G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules
SCHEDULE XXX
MANUFACTURE OF RAYON BY VISCOSE PROCESS
1. Definitions
For the purpose of this schedule
(a) "approved" means approved for the time being in writing by the Chief Inspector;
(b) "breathing apparatus" means a helmet or face piece with necessary connections by means of which the person using it in a poisonous, asphyxiating or irritant atmosphere breathes unpolluted air; or any other approved apparatus;
(c) "churn" means the vessel in which alkali cellulose pulp is treated with carbon disulphide;
(d) "dumping" means transfer of cellulose xanthate from a dry churn to a dissolver;
(e) "efficient exhaust draught" means a localized ventilation by mechanical means for the removal of any gas or vapour, so as to prevent it from escaping into the air or any place in which work is carried on. No draught shall be deemed to be efficient if it fails to control effectively any gas or vapour generated at the point where such gas or fume originates;
(f) "fume process" means any process in which carbon disulphide or hydrogen sulphide is produced, used or given off;
(g) "life belt" means a belt made of leather or other suitable material which can be securely fastened round the body with a suitable length of rope attached to it, each of which is sufficiently strong to sustain the weight of a man;
(h) "protective equipment" means apron, goggles, face shields, footwear, gloves and overalls made of suitable materials.
2. Ventilation
(1) In all workrooms where a fume process is carried on, adequate ventilation by natural or mechanical means shall be provided so as to control, in association with other control measures, the concentration of carbon-disulphide and hydrogen sulphide in the air of every work environment within the permissible limits.
(2) Notwithstanding the requirements in sub-paragraph (1), an efficient exhaust draught shall be provided and maintained to control the concentration of carbon- disulphide and hydrogen sulphide in the air at the following locations:
(a) dumping hoppers of dry churns;
(b) spinning machines;
(c) trio rollers and cutters used in staple fiber spinning;
(d) hydro-extractors for yarn cakes;
(e) after treatment processes; and
(f) spin baths.
(3) In so far as the spinning machines and trio rollers and cutters used in staple fiber spinning are concerned, they shall be, for the purpose of ensuring the effectiveness of the exhaust draught to be provided as required in sub-paragraph (1), enclosed as fully as practicable and provided with suitable shutters in sections to enable the required operations to be carried out without giving rise to undue quantities of carbon-di-sulphide and hydrogen sulphide escaping to the work environment
(4) No dry churn shall be opened after completion of reaction without initially exhausting the residual vapors of carbon-di- sulphide by operation of a suitable and efficient arrangement for exhausting the vapors which shall be continued to be operated as long as the churn is kept opened.
(5) Whenever any ventilation apparatus normally required for the purpose of meeting the requirements in sub-paragraphs (2), (3) and (4) is ineffective, fails, or is stopped for any purpose whatsoever, all persons shall be required to leave the work areas where the equipment or processes specified in the above said sub- paragraphs are in use, as soon as possible, and in any case not later than 15 minutes after such occurrence.
(6)
(i) All ventilating systems provided for the purposes as required in sub- paragraphs (2), (3) and (4) shall be examined and inspected once every week by a responsible person. It shall be thoroughly examined and tested by a competent person once in every period of 12 months. Any defects found by such examinations of test shall be rectified forthwith.
(ii) A register containing particulars of such examinations and tests, and the state of the systems and the repairs or alterations (if any) found to be necessary shall be kept and shall be available for inspection by an Inspector.
3. Waste from spinning machines
Waste yarn from the spinning machines shall be deposited in suitable containers provided with close fitting covers. Such waste shall be disposed off as quickly as possible after decontamination.
4. Linking of dry churns
The inside surface of all dry churns shall be coated with a non-sticky paint so that cellulose xanthate will not stick to the surface of the churn, such coating shall be maintained in good condition.
5. Air monitoring
(1) To ensure the effectiveness of the control measures, monitoring of carbon- disulphide and hydrogen sulphide in air shall be carried out once at least in every shift and the record of the results so obtained shall be entered in a register specially maintained for the purposes.
(2) For the purpose of the requirement in sub-paragraph (1), instantaneous gas detector tubes shall not be used. Samples shall be collected over a duration of not less than 10 minutes and analyzed by an approved method. The locations where such monitoring is to be done shall be as directed by the Inspector.
(3) If the concentration of either carbon disulphide or hydrogen sulphide exceeds the permissible limits for such vapour or gas as laid down in Rule 102A suitable steps shall be taken for controlling the concentrations in air of such containers. A report of such occurrences shall be sent to the Chief Inspector forthwith.
6. Prohibition to remain in fume process room
No person during his intervals for meal, or rest shall remain in any room wherein fume process is carried on.
7. Prohibition relating to employment of young persons
No young person shall be employed or permitted to work in any fume process or in any room in which any such process is carried on.
8. Protective equipment
(1) The occupier shall provide and maintain in good condition protective equipment as specified in the Table for use of persons employed in the processes referred to therein. THE TABLE Process Protective equipment
(1) (2) Overalls, face-shields, gloves and 1. Dumping footwear - all made of suitable material 2. Spinning Suitable aprons, gloves and footwear 3. Process involving or likely to involve Suitable gloves and footwear contact with viscose solution 4. Handling of Sulphur Suitable Chemical goggles Protective equipment as may be 5. Any other process involving contact directed by the Chief Inspector by an with hazardous chemicals order in writing
(2) A suitable room, rooms or lockers shall be provided exclusively for the storage of all the protective equipment supplied to workers and no such equipment shall be stored at any place other than the room, rooms or lockers so provided.
9. Breathing apparatus
(1) There shall be provided in every factory where fume process is carried on, sufficient supply of,
(a) breathing apparatus;
(b) oxygen and suitable appliances for its administration; and
(c) life belts.
(2)
(i) The breathing apparatus and other appliances referred to in sub-paragraph (1) shall be maintained in good condition and kept in appropriate locations so as to be readily available.
(ii) The breathing apparatus and other appliances referred to in clauses (a) and (b) of sub-paragraph (1) shall be cleaned and disinfected at suitable intervals and thoroughly inspected once every month by a responsible person.
(iii) A record of the maintenance and of the condition of the breathing apparatus and other appliances referred to in sub- clause (1) shall be entered in a register provided for that purpose which shall be readily available for inspection by an Inspector.
(3) Sufficient number of workers shall be trained and periodically re-trained in the use of breathing apparatus and administering artificial respiration so that at least two such trained persons would be available during all the working hours in each room in which (tune process is carried on.
(4) Breathing apparatus shall be kept properly labeled in clean, dry, light proof cabinets and if liable to be affected by fumes, shall be protected by placing them in suitable containers.
(5) No person shall be employed to perform any work specified in sub-paragraph (1) for which breathing apparatus is necessary to be provided under that sub-paragraph unless he has been fully instructed in the proper use of that equipment.
(6) No breathing apparatus provided in pursuance of subparagraph (1) which has been worn by a person shall be worn by another person unless it has been thoroughly cleaned and disinfected since last being worn and the person has been fully instructed in the proper use of that equipment.
10. Electric fittings
All electric fittings in any room in which carbon-disulphide is produced, used or given off or is likely to be given off into the work environment, other than a spinning room, shall be of flame-proof construction and all electric conductors shall either be enclosed in metal conduits or be lead sheathed.
11. Prohibition relating to smoking, etc
No person shall smoke or carry matches, fire or naked light or other means of producing a naked light or spark in a room in which fume process is carried on. A notice in the language understood by the majority of the workers shall be posted in prominent locations in the plant prohibiting smoking and carrying of matches, fire or naked light or other means of producing naked light or spark into such rooms.
Provided that fire, naked light or other means of producing a naked light or spark may be carried on in such room only when required for the purpose of the process itself under the direction of a responsible person.
12. Washing and bathing facilities
(1) There shall be provided and maintained in a clean state and in good repair for the use of all workers employed in the processes covered by the schedule, adequate washing and bathing places having a constant supply of water under cover at the rate of one such place for every 25 persons employed.
(2) The washing places shall have stand pipes placed at intervals of not less than one meter.
(3) Not less than one half of the total number of washing places shall be provided with bathrooms.
(4) Sufficient supply of clean towels made of suitable material shall be provided:
Provided that such towels shall be supplied individually for each worker if so ordered by the Inspector.
(5) Sufficient supply of soap and nail brushes shall be provided.
13. Rest room
(1) A rest room shall be provided for the workers engaged in doffing operations of filament yarn spinning process.
(2) Such rest room shall be provided with fresh air supply and adequate seating arrangement.
14. Cautionary notice and instructions
(1) The following cautionary notice shall be prominently displayed in each fume process room: - CAUTIONARY NOTICE 1. Carbon disulphide (CS) and Hydrogen Sulphide (H2S) which may be present in this room are hazardous to health. 2. Follow safety instructions. 3. Use protective equipment and breathing apparatus as and when required. 4. Smoking is strictly prohibited in this area. This notice shall be in a language understood by the majority of the workers and displayed where it can be easily and conveniently read. If any worker is illiterate, effective steps shall be taken to explain carefully to him the contents of the notice so displayed.
(2) Arrangements shall be made to instruct each worker employed in any room in which a fume process is carried on regarding the health hazards connected with their work and the preventive measures and methods to protect themselves. Such instructions shall be given on his first employment and repeated periodically.
(3) Simple and special instructions shall be framed to ensure that effective measures will be carried out in case of emergency involving escape of carbon disulphide and hydrogen sulphide. Those instructions shall be displayed in the concerned areas and workers shall be instructed and trained in the actions to be taken in such emergencies.
15. Medical facilities and records of examinations and tests
(1) The occupier of each factory to which the schedule applies, shall
(a) employ a qualified medical officer for medical surveillance of the workers employed in the fume process whose employment shall be subject to the approval of the Chief Inspector of Factories; and
(b) provide to the said medical officer all the necessary facilities for the purpose referred to in clause (a).
(2) The record of medical examination and appropriate tests carried out by the said medical officer shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector.
16. Medical examination by the Certifying Surgeon
(1) Every worker employed in the finite process shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for estimation of exposure co-efficient (iodine azide test in urine) and cholesterol, as well as Electrocardiogram (ECG) and Central Nervous System (CNS) tests. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon.
(2) Every worker employed in the fume process shall be re-examined by a Certifying Surgeon at least once in every twelve calendar months. Such examination shall wherever the Certifying Surgeon considers appropriate, include all the tests as specified in sub-paragraph (1).
(3) The Certifying Surgeon after examining a worker, shall issue a certificate of fitness in Form 27. The record of re-examinations carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The record of each examination carried out shall be entered in the certificate and the certificate shall be kept in the custody of the Manager of the factory. The records of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a health register in Form 17A.
(4) The Certificate of Fitness and the health register shall be kept readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the fume process on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the fume process. 255 [The persons so suspended from the process shall be provided with alternative placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated.]
(6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the fume process unless the Certifying Surgeon, after further examination again certifies him fit for employment in such process.
17. Exemptions
If in respect of any factory, the Chief Inspector is satisfied that owing to the exceptional circumstances or infrequency of the processes or for any other reason, all or any of the provisions of this schedule is not necessary for protection of the workers in the factory, the Chief inspector may, by a certificate in writing, which he may at his discretion revoke at any time, exempt such factory from all or any of such provisions subject to such conditions, if any, as he may specify therein. 256
