NextGen Socio & Enviro Advisors

The Tamil Nadu Factories Rules, 1950

Arrangement of Rules

G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules

SCHEDULE V

SCHEDULE V

GRINDING OR GLAZING OF METALS AND PROCESSES INCIDENTAL THERETO

1. Definitions

For the purposes of this schedule

(a) "Grindstone" means a grindstone composed of natural or manufactured sandstone but does not include a metal wheel or cylinder into which blocks of natural or manufactured sandstone are fitted.

(b) "Abrasive wheel' means a wheel manufactured of bonded emery or similar abrasive.

(c) "Grinding" means the abrasion, by aid of mechanical power of metal, by means of a grindstone or abrasive wheel.

(d) "Glazing" means the abrading, polishing or finishing by aid of mechanical power of metal, by means of any wheel, buff mop or similar appliance to which any abrading or polishing substance is attached or applied.

(e) "Racing" means the turning up, cutting or dressing of a revolving grindstone before it is brought into use for the first time.

(f) "Hacking" means the chipping of the surface of a grindstone by a hack or similar tool.

(g) "Rodding" means the dressing of the surface of a revolving grindstone by the application of rod, bar or strip of metal to such surface.

2. Exemptions

(1) Nothing in this schedule shall apply to any factory in which only repairs are carried on except any part thereof in which one or more persons are wholly or mainly employed in the grinding or glazing of metals.

(2) Nothing in this schedule except paragraph 4 shall apply to any grinding or glazing of metals carried on intermittently and at which no person is employed for more than 12 hours in any week.

(3) The Chief Inspector may by certificate in writing, subject to such condition as he may specify therein, relax or suspend any of the provisions of this schedule in respect of any factory if owing to the special methods of work or otherwise such relaxation or suspension is practicable without danger to the health or safety of the persons employed.

3. Equipment for removal of dust

No racing, dry grinding or glazing shall be performed without

(a) a hood or other appliance so constructed, arranged, placed, and maintained as substantially to intercept the dust thrown off;

(b) a duct of adequate size, air-tight and so arranged as to be capable of carrying away the dust, which dust shall be kept free from obstruction and shall be provided with proper means of access for inspection and cleaning, and where practicable, with a connection at the end remote from the fan to enable the Inspector to attach thereto any instrument necessary for ascertaining the pressure of air in the said duct; and

(c) a fan or other efficient means of producing a draught sufficient to extract the dust:

Provided that the Chief Inspector may accept any other appliance that is, in his opinion, as effectual for the interception, removal and disposal of dust thrown off as a hood, duct and fan would be.

4. Restriction on employment on grinding operations

Not more than one person shall at any time perform the actual process of grinding, or glazing upon a grindstone, abrasive wheel or glazing appliance:

Provided that this paragraph shall not prohibit the employment of persons to assist in the manipulation of heavy or bulky articles at any such grindstone, abrasive wheel or glazing appliance.

5. Glazing

Glazing or other processes, except processes incidental to wet grinding upon a grindstone shall not be carried on in any room in which wet grinding upon a grindstone is done.

6. Hacking and rodding

Hacking or rodding shall not be done unless during the process either (a) an adequate supply of water is laid on at the upper surface of the grindstone or (b) adequate appliances for the interception of dust are provided in accordance with the requirements of paragraph 3.

7. Examination of dust equipment

(a) All equipment for the extraction or suppression of dust shall at least once in every six months be examined and tested by a competent person, and any defect disclosed by such examination and test shall be rectified as soon as practicable.

(b) A resister containing particulars of such examination and test shall be kept in 198 [Form No. 37] 199 [7-A Medical facilities and record of examinations and tests

(1) The occupier of every factory in which grinding or glazing of metals arc carried out, shall

(a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose appointment shall be subject to the approval of the Chief Inspector of Factories; and

(b) provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a).

(2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector.

7-B Medical examination by Certifying Surgeon

(1) Every worker employed in grinding or glazing of metal and processes incidental thereto shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include pulmonary function tests and in suspected cases chest X-rays. No worker shall be allowed to work after 15 days, of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon.

(2) Every worker employed in the said processes shall be re-examined by a Certifying Surgeon at least once in every 12 calendar months. Such re- examination shall wherever the Certifying Surgeon considers appropriate, include tests as specified in sub-paragraph (1).

(3) The Certifying Surgeon after examining a worker, shall issue a Certificate of Fitness in Form 27. The record of examination and re-examinations carried out shall be entered in the Certificate and the Certificate shall be kept in the custody of the Manager of the Factory. The record of each examination carried out under sub- paragraphs (1) and (2) including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a Health Register in Form 17.

(4) The Certificate of Fitness and the Health Register shall be kept readily available for inspection by the Inspector.

(5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker he shall make a record of his findings in the said Certificate and the Health Register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. The person so suspended from the process shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon in which case the person affected shall be suitably rehabilitated.

(6) No person who has been found unfit to work as said in sub-paragraph (5) shall be re- employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes]