The Tamil Nadu Factories Rules, 1950
Arrangement of Rules
G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules
SCHEDULE XV
POTTERY
1. Definitions
For the purposes of this schedule
(a) 'pottery' includes earthenware, stoneware, porcelain, china tiles and any other articles made from clay or from a mixture containing clay, any other materials such as quartz, flint, feldspar and gypsum.
(b) 'efficient exhaust draught' means localized ventilation affected by mechanical or other means, for the removal of dust or fume so as to prevent it from escaping into the air or any place in which work is carried on. No draught shall be deemed efficient which fails to remove effectively dust or fume generated at the point where dust or fume originates;
(c) 'fettling ’ includes scalloping, towing, sand papering, sand sticking, brushing or any other process of cleaning of pottery-ware in which dust is given off;
(d) ‘ leadless glaze' mean a glaze which does not contain more than one percent of its dry weight of a lead compound calculated as lead monoxide;
(e) 'low solubility glaze' means a glaze which does not yield to dilute hydrochloric add more than five per cent. of its dry weight of a soluble lead compound calculated as lead monoxide when determined in the manner described below: — A weighed quantity of the material which has been dried at 100 ° C and thoroughly mixed shall be continuously shaken for one hour at the common temperature with 1,003 times its weight of an aqueous solution of hydrochloric acid containing 0.25 per cent. by weight of hydrogen chloride. This solution shall thereafter be allowed to stand for one hour and then filtered. The lead salt contained in the clear filtrate shall then be precipitated as lead sulphide and weighed as lead sulphate;
(f) 'ground or powdered flint or quartz' does not include natural sands;
(g) 'potter's shop' includes all places where pottery is firmed by pressing or by any other process and all places where shaping, fettling or other treatment of pottery articles prior to placing for the biscuit rue is carried on.
2. Efficient exhaust draught
The following processes shall not be carried on without the use of an efficient exhaust draught:
(i) All processes involving the manipulation or use of a dry and unfitted lead compound;
(ii) The fettling operations of any kind, whether on green ware or biscuit, provided that this shall not apply to the wet fettling, and to the occasional finishing of pottery articles without the aid of mechanical power;
(iii) The sifting of clay dust or any other material for making tiles or other articles by pressure, except where
(a) this is done in a machine so enclosed as to effectively prevent the escape of dust; or
(b) the material to be sifted is so damp that no dust can be given off;
(iv) The pressing of tiles from clay dust, an exhaust opening being connected with each press; this clause shall also apply to the pressing from clay dust of articles other than tiles, unless the material is so damp that no dust is given off;
(v)
(a) The fettling of tiles made from clay dust, by pressure. except where the fettling is done wholly on, or with, damp material;
(b) The fettling of other articles made from clay dust, unless the material is so damp that no dust is given off;
(vi) The process of loading and unloading of saggars, where handling and manipulation of ground and powdered flint, quart, alumina or other materials are involved;
(vii) The brushing of earthenware biscuit, unless the process is carried on in a room provided with efficient general mechanical ventilation or other ventilation which is certified by the Inspector of Factories as adequate, having regard to all the circumstances of the case;
(viii) Fettling of biscuit ware which has been fired in powdered flint or quartz except where this is done in machines so enclosed as to effectively prevent the escape of dust;
(ix) Ware cleaning after the application of glaze by dipping or other process;
(x) Crushing and dry grinding of materials for pottery bodies and saggars, unless carried on in machines so enclosed as to effectively prevent the escape of dust or is so damp that no dust can be given off;
(xi) Sieving or manipulation of powdered flint, quartz, day grog or mixture of these materials unless it is so damp that no dust can be given off;
(xii) Grinding of tiles on a power- driven wheel unless an efficient water spray is used on the wheel;
(xiii) Lifting and conveying of materials by elevators and conveyors unless they are effectively enclosed and so arranged as to prevent escape of dust into the air in or near any place in which persons are employed;
(xiv) The preparation or weighing out of flow material, !awning of dry colors, colour dusting and colour blowing;
(xv) Mould making, unless the bins or similar receptacles are used for holding plaster of paris and provided with suitable covers;
(xvi) The manipulation of calcined materials unless the material has been made and remain so wet that no dust is given off.
3. Certain processes to be carried on so as to secure effective separation from one another Each of the following processes shall be carried on in such a manner and under such conditions so as to secure effectual separation from one another, and from wet processes:
(a) Crushing and by grinding or sieving of materials, fettling, pressing of tiles, drying day and green ware, loading and unloading of saggars; and
(b) all processes involving the use of a dry lead compound.
4. Restriction on the use of glaze
No glaze which is not a leadless glaze or a low solubility glaze shall be used in a factory in which pottery is manufactured.
5. Prohibition of the employment of women and young persons
No woman or young person shall be employed or permitted to work in any of the operations specified in paragraph 2, or at any place where such operation is carried on.
6. Potter's wheel
The potter's wheel (Jolly and Jiggar) shall be provided with screens or so constructed as to prevent clay scrapings being thrown off beyond the wheel.
7. Prevention of dust
(1) All practical measures shall be taken by damping or otherwise to prevent dust arising during cleaning of floors.
(2) Damp saw dust or other suitable materials shall be used to render the moist method effective in preventing dust rising into the air during the cleaning process which shall be carried out after work has ceased.
8. Floors
The floors of potters' shops, slip houses, dipping houses and ware cleaning rooms shall be hard, smooth and impervious and shall be thoroughly cleaned daily by a moist method by an adult male. 210
9. [Medical facilities and records of examinations and tests
(1) The occupier of every factory in which manufacture of pottery is carried on, shall --
(a) employ a qualified medical practitioner for medical surveillance of the workers employed therein whose employment shall be subject to the approval of the Chief Inspector of Factories; and
(b) Provide to the said medical practitioner all the necessary facilities for the purpose referred to in clause (a).
(2) The record of medical examinations and appropriate tests carried out by the said medical practitioner shall be maintained in a separate register approved by the Chief Inspector of Factories, which shall be kept readily available for inspection by the Inspector.
10. Medical Examination by Certifying Surgeon
(1) Every worker employed in any process mentioned under paragraph 2, shall be examined by a Certifying Surgeon within 15 days of his first employment. Such examination shall include tests for lead in urine and blood, ALA in urine, hemoglobin content, stippling of cells and pulmonary function test and chest X-ray for workers engaged in processes mentioned in clauses (i) and (xiv) of paragraph land pulmonary function tests and chest X-rays for the others. No worker shall be allowed to work after 15 days of his first employment in the factory unless certified fit for such employment by the Certifying Surgeon.
(2) All persons employed in any of the processes included under sub-paragraph 2 (i) and
(xiv) shall be examined by a Certifying Surgeon once in every three calendar months. Those employed in any other processes mentioned in the remaining sub-paragraphs of paragraph 2 shall be examined by a Certifying Surgeon once in every twelve calendar months. Such examinations in respect of all the workers shall include all the tests as specified in sub-paragraph (1) except chest X-ray which will be once in three years
(3) The Certifying Surgeon, after examining a worker, shall issue certificate of fitness in Form 27. The record of examination and re-examinations carried out shall be entered in the Certificate and the Certificate shall be kept in the custody of the Manager of the Factory. The record of each examination carried out under sub-paragraphs (1) and (2), including the nature and the results of the tests, shall also be entered by the Certifying Surgeon in a Health Register in Form 17.
(4) The certificate of fitness and the health register shall be kept readily available for inspection by the Inspector.
(5) If at any time the Certifying Surgeon is of the opinion that a worker is no longer fit for employment in the said processes on the ground that continuance therein would involve special danger to the health of the worker, he shall make a record of his findings in the said certificate and the health register. The entry of his findings in those documents should also include the period for which he considers that the said person is unfit for work in the said processes. The person so suspended from the process, shall be provided with alternate placement facilities unless he is fully incapacitated in the opinion of the Certifying Surgeon, in which case the person affected shall be suitably rehabilitated.
(6) No person who has been found unfit to work as said in sub-paragraph (5) above shall be re-employed or permitted to work in the said processes unless the Certifying Surgeon, after further examination, again certifies him fit for employment in those processes.]
11. Protective equipment
(1) The occupier shall provide and maintain suitable overalls and head coverings for all persons employed in any process specified in paragraph 2.
(2) The occupier shall provide and maintain suitable aprons of water-proof or similar material, which can be sponged daily for the use of the dippers, dippers' assistants, throwers, jolly workers, casters, mould makers and filter press and pug mill workers.
(3) Aprons provided in pursuance of sub- paragraph (2) shall be thoroughly cleaned daily by the wearers by sponging or other wet process. All overalls and head coverings shall be washed, cleaned and mended atleast once a week and the occupier shall provide facilities for such washing, cleaning and mending.
(4) No person shall be allowed to work in emptying sacks of dusty materials, weighing out and mixing of dusty materials and charging of ball mills and blungers without wearing a suitable and efficient dust respirator.
12. Washing facilities
The occupier shall provide and maintain, in a cleanly state and in good repair for the use of all persons employed in any of the processes specified in paragraph 2 a wash place under cover with --
(a) either a trough with smooth impervious surface fitted with a waste pipe, without plug, and of sufficient length to allow atleast 60 centimeters for every five such persons employed at any one time, and having a constant supply of clean water from taps or jets above the trough at intervals of not more than 60 centimeter; Or atleast one tap or stand pipe for every five such persons employed at any one time, and having a constant supply of clean water, the tap or stand pipe being spaced not less than 1.22 meters apart; and
(b) a sufficient supply of clean towels made of suitable materials changed daily, with sufficient supply of nail brushes and soap.
13. Time allowed for washing
Before each meal and before the end of the day's work at least ten minutes, in addition to the regular meal times, shall be allowed for washing to each person employed in any of the processes specified in paragraph 2.
14. Mess-room
(1) There shall be provided and maintained for use of all persons remaining within the premises during the rest intervals, a suitable and an adequate mess room providing accommodation at the rate of 0.93 square meters per head and furnished with the following, namely:
(i) a sufficient number of tables and chairs or benches with back rests;
(ii) arrangements for washing utensils;
(iii) adequate means for warming food; and
(iv) adequate quantity of drinking water.
(2) The room shall be adequately ventilated by the circulation of 'fresh air and placed under the charge of a responsible person and shall be kept clean.
15. Food drinks, etc., prohibited in work- rooms
No food, drink, pan and supari or tobacco shall be brought into, or consumed by any worker in any work-room in which any process specified in paragraph 2 is carried on and no person shall remain in any such room during intervals for meals or rest.
16. Cloak-room, etc
There shall be provided and maintained for the use of all persons employed in any process specified in paragraph 2
(a) a cloak-room for clothing put off during working hours and such accommodation shall be separate from any mess room; and
(b) separate and suitable arrangements for the storage of protective equipment provided under paragraph 11.
17. Savings
Nothing contained in this Schedule shall apply to a factory in which any of the following articles, but no other ankles of pottery are made:
(a) unglazed or salt glazed bricks and tiles; and
(b) Architectural terra-cotta made from plastic clay and either unglazed or glazed with leadless glaze only.
18. Exemption
If the Chief Inspector of Factories is satisfied in respect of any factory that the application of all or any of the provisions of this Schedule to that factory, is not necessary for the protection of the persons employed in such factory, he may, by order in writing, exempt such factory, from all or any of those provisions, subject to such conditions as he may specify therein. The Chief Inspector may at any time in his discretion revoke such order without assigning any reason. 211
