NextGen Socio & Enviro Advisors

The Tamil Nadu Factories Rules, 1950

Arrangement of Rules

G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules

SCHEDULE XXVIII

OPERATIONS INVOLVING HIGH NOISE LEVELS

1. Application

This schedule shall apply to all operations in any manufacturing process having high noise level.

2. Definitions

For the purpose of this schedule

(a) 'Noise' means any unwanted sound.

(b) 'High noise level' means any noise level measured on the A weighted scale is 90 dB or above.

(c) 'Decibel' means one-tenth of 'Bel' which is the fundamental divisions of a logarithmic scale used to express the ratio of two specified or implied quantities, the number of ‘ Bels ’ denoting such a ration being the logarithm to the base of 1 of this ratio. The noise level (or the sound pressure level) corresponds to a reference pressure of 20 X 10.6 newtons per square meter or 0.0002 dynes per square centimeter which is the threshold of hearing, that is the lowest sound pressure level necessary to produce the sensation of hearing in average healthy listeners. The decibel in abbreviated form is dB.

(d) "Frequency" is the rate of pressure variations expressed in cycles per second or hertz.

(e) ‘ dBA' refers to sound level in decibels as measured on a sound level meter operating on the A-weighting net work with slow meter response.

(f) ‘ A-weighting' means making graded adjustments in the intensities of sound of various frequencies for the purpose of noise measurement, so that the sound pressure level measured by an instrument reflects the actual response of the human ear to the sound measured.

3. Protection against noise

(1) In every factory, suitable engineering control or administrative measures shall be taken to ensure, so far as is reasonably practicable, that no worker is exposed to sound levels exceeding the maximum permissible noise exposure levels specified in Tables 1 and 2. TABLE 1 PERMISSIBLE EXPOSURE IN CASES OF CONTINUOUS NOISE. Total time of exposure Sound pressure level in (continuous or a member of short term exposures) dBA per day, in hours. 8 90 6 92 4 95 3 97 2 100 1 ½ 102 1 105 ¾ 107 ½ 110 ¼ 115

Explanation

(1) No exposure in excess of 115 dBA is to be permitted.

(2) For any period of exposure falling in between any figure and the next higher or lower figure as indicated in column 1, the permissible sound pressure level is to be determined by extrapolation on a proportionate basis. TABLE 2 PERMISSIBLE EXPOSURE LEVELS OF IMPULSIVE OR IMPACT NOISE Peak sound pressure Permitted number of impulses level In dB or Impacts per day 140 100 135 315 130 1,000 125 3,160 120 10,000

Explanation

(1) No exposure in excess of 140 dB peak sound pressure level is permitted.

(2) For any peak sound pressure level falling in between any figure and the next higher or lower figure as indicated in column 1, the permitted number of impulses or impacts per day is to be determined by extrapolation on a proportionate basis.

(2) For the purposes of this schedule, if the variations in the noise level involve maximum at intervals of one second or less, the noise is to be considered as a continuous one and the criteria given in Table I would apply. In other cases, the noise is to be considered as impulsive or impact noise and the criteria given in the Table 2 would apply.

(3) When the daily noise exposure is composed of two or more periods of noise exposure at different levels their combined effect should be considered, rather than the individual effect of each. The mixed exposure should be considered to exceed the limit value if the sum of the fractions C1/ T1 + C2/T2 + Cn/Tn ….. Exceeds unit p-1 Where the C1, C2, etc., indicate the total time of actual exposure at a specified noise level and T1, T2, etc. denote the time of exposure permissible at that level. Noise exposure of less than 90 dBA may be ignored in the above calculation.

(4) Where it is not possible to reduce the noise exposure to the levels specified in sub- rule (1) by reasonably practicable engineering control or administrative measures, the noise exposure shall be reduced to the greatest extent feasible by such control measures and each worker so exposed shall be provided with suitable ear protectors so as to reduce the exposure to noise to the levels specified in sub-rule (1).

(5) Where the ear protectors provided in accordance with sub-paragraph (2) and worn by a worker cannot still attenuate the noise reaching near his ear, as determined by subtracting the attenuation value in dBA of the ear protectors concerned from the measured sound pressure level, to a level permissible under Table I or fable 2 as the case may be, the noise exposure period shall be suitably reduced to correspond to the permissible noise exposures specified in sub-paragraph (1).

(6)

(a) In all cases where the prevailing sound levels exceed the permissible levels specified in sub-paragraph (1) there shall be administered an effective hearing conservation programme which shall include among other hearing conservation measures, pre-employment and periodical audit surveys conducted on workers exposed to noise exceeding the permissible levels, and rehabilitation of such workers either by reducing the exposure to the noise levels or by transferring them to places where noise levels are relatively less or by any other suitable means.

(b) Every worker employed in areas where the noise exceeds the maximum permissible exposure levels specified in sub-rule (1) shall be subjected to an auditory examination by a Certifying Surgeon within 14 days of his first employment and thereafter shall be re-examined at least once in every 12 months. Such initial and periodical examinations shall include tests which the Certifying Surgeon may consider appropriate, and shall include determination of auditory thresholds for pure tones of 125, 250, 500, 1,000, 2,000, 4,000 and 8,000 cycles per second.] 251