NextGen Socio & Enviro Advisors

The Tamil Nadu Factories Rules, 1950

Arrangement of Rules

G.O. No. 1041 of 1950 · Tamil Nadu · 68 chapters and schedules, 167 rules

Chapter I

PRELIMINARY

1.Short title, extent and commencement

(1)

These rules may be cited as the Tamil Nadu Factories Rules, 1950.

(2)

These rules shall extend to the whole of State of Tamil Nadu including the Kanyakumari district, the Shencottah taluk of the Tirunelveli district and the territories specified in the Second Schedule to the Andhra Pradesh and Madras (Alteration of Boundaries) Act, 1959 (Central Act 56 of 1959).

(3)

These rules except rules 29 to 33, 53, 62, 64 to 71 and 95 shall come into force at once and rules 29 to 33, 53, 62, 64 to 71 and 95 shall come into force on such dates as may be specified there under.

2.Definitions

In these rules, unless there is anything repugnant in the subject or context

(a) “ Act " means the Factories Act, 1948.

(b) "Appendix ” means an appendix appended to these rules.

(c) "Artificial humidification ” means the introduction of moisture into the air of a room by any artificial means whatsoever, except the unavoidable escape of steam or water vapor into the atmosphere directly due to a manufacturing process.

Provided that the introduction of air directly from outside through moistened mats or screens placed in openings at times when the temperature of the room is [26.7 degrees] or more, shall not be deemed to be artificial humidification.

(d) “ Belt " includes any driving strap or rope.

(e) “ Degree " (of temperature) means degree on the [Celsius scale]

(f) "District Magistrate ” includes the Additional District Magistrate and any other officer appointed by the State Government in that behalf and in a Presidency town or its suburbs, shall mean the Commissioner of Police.

(g) "Family" means the wife, son, daughter, father, mother, brother or sister of the owner of any place wherein a manufacturing process is carried on who lives with or is dependent on, such owner.

(h) "Fume" includes gas or vapour.

(i) "Health Officer" means the Municipal Health Officer in a municipality or corporation, the District Health Officer concerned in any area within the jurisdiction of a district board or panchayat or such other officer as may be appointed by the State Government for any area in that behalf irrespective of whether such area is within the limits of a municipality or the jurisdiction of a district board or panchayat.

(j) "Hygrometer" means an accurate wet and dry bulb hygrometer conforming to the prescribed conditions as regards construction and maintenance.

(k) [* * *]

(l) "Maintained" means maintained in an efficient state, in efficient working order and in good repair

(m) "Manager" means a person nominated or appointed as such by the occupier of the factory under section 7 for the purposes of the Act.

(n) Local Authority" means the commissioner in the case of an area within the limits of a Municipality or Corporation, the executive officer in the case of an area within the jurisdiction of a panchayat, and the president of a district board in the case of any other area.

(o) ” Public Health Authority" means the local Health Officer having jurisdiction over the area.

2-A.Competent person

(1)

The Chief Inspector may recognize any person as a 'Competent person' within such area and for such period as may he specified for the purposes of carrying out tests, examinations, inspections and certification for such buildings, dangerous machinery, hoists and lifts, lifting machines and lifting tackles, confined space ventilation system and such other process or plant and equipment as stipulated in the Act and the rules made thereunder located in a factory, if such a person possesses the qualifications, experience and other requirements asset out in the Schedule annexed to this rule:

Provided that the Chief Inspector may relax the requirements of qualifications in respect of a `competent person' if such a person is exceptionally experienced and knowledgeable, but not the requirements in respect of the facilities at his command.

Provided further that where it is proposed to recognize a person employed under the Chief Inspector as a 'Competent person' concurrence of the State Government shall be taken and such a person after being so recognised shall not have powers of an ‘ Inspector ’:

Provided also that the 'Competent person' recognised under this provision shall not be above the age of sixty-two and shall be physically fit for the purpose of carrying out the tests, examinations and inspections.

(2)

The Chief Inspector may recognize an institution of repute having persons possessing qualifications and experience as set out in the Schedule annexed to this rule for the purpose of carrying out tests, examination, inspections, and certification for building, dangerous machinery, hoists and lifts, lifting machines and lifting tackles, confined space ventilation system and such other process or plant and equipment as stipulated in the Act and the rules made thereunder, as a 'Competent person' within such area and for such period as may be specified.

(3)

The Chief Inspector on receipt of an application in the prescribed form from a person or an institution intending to be recognised as a 'Competent person' for the purposes of this Act and the rules made thereunder shall register such application and within a period of sixty days of the date of receipt of application either after having satisfied himself as regards competence and facilities available at the disposal of the applicant, recognize the applicant as a 'Competent person' and issue a certificate of competency in the prescribed form or reject the application specifying the reasons therefor.

(4)

The Chief Inspector may after giving an opportunity to the competent person of being heard, revoke the certificate of competency,

(i) if he has reason to believe that a competent person

(a) has violated any condition stipulated in the certificate of competency;

(or)

(b) has carried out a test examination and inspection or

(c) has acted in a manner inconsistent with the intent or the purpose of this Act or the rules made thereunder; or

(d) has omitted to act as required under the Act and rules made thereunder

(ii) for any other reason to be recorded in writing

Explanation: For the purpose of this rule, an institution includes an organization.

(5)

The Chief Inspector may, for reasons to be recorded in writing, require certification of lifting machines, lifting tackles, or ventilation system, as the case may be which has been certified by a competent person outside the State. (Forms and schedule to Rule 2A provided in Appendix 1)

3.Approval of site, construction or extension of a factory

(1)

(a) [[No site shall be used for the location of a factory or no building in a factory be constructed, reconstructed extended or taken into use as a factory or part of a factory, or no installation of plant or machinery carried out in a factory without the previous permission in writing of the [Chief Inspector or Deputy Chief Inspector as the case may be]. The previous permission of the *[Chief Inspector or Deputy Chief Inspector as the case may be] shall also be obtained for the installation of additional machinery or for the installation of prime movers exceeding the horse-powers already installed in the factory.]

(b) The [Chief Inspector or Deputy Chief Inspector as the case may be] may require, for the purpose of the Act, submission of plans of any factory which was either in existence on the date of commencement of the Act or which has not been constructed or extended since then.]

(2)

[Application for such permission or submission of plans shall be made in Form No.1 in triplicate.] It shall be accompanied by the following documents, namely:

(a) [a flow chart of the manufacturing, process supplemented by a brief description of the process in its various stages, including the chemicals used, if any, in the various stages of the process and the steps proposed to be taken for effective removal of dust, fumes, gases and regarding the proper and effective disposal of trade wastes and effluents;

(b) plans in triplicate drawn to scale showing-

(i) the site of the factory and immediate surroundings including adjacent buildings and other structures, roads, drains, and the like; and

(ii) the plan elevation and necessary cross sections of various buildings indicating all relevant details relating to natural lighting, ventilation and means of escape in case of fire. The plans shall also clearly indicate the position of the plant and machinery, aisles and Passageways.

[***]

(c) [Omitted]

(d) [a certificate from the [Tamil Nadu Pollution Control Board, Madras], to the effect that the arrangements made for disposal of industrial liquid wastes, effluents and air pollutants in the case of complex chemical factories and regarding the steps taken for proper disposal of wastes and effluents are effective;

(e) [such other particulars as the [Chief Inspector or Deputy Chief Inspector, as the case may be] may require.

[Provided that where an application for such permission has been made in the common application form for single window clearance approved in GO. Ms. No. 203, Industries (MIB-1) Department, dated 24th December, 2001 then making of an application in Form No.1 is not necessary.).

(3)

After examination of the documents referred to in sub-rule (2), the [Chief Inspector or Deputy Chief Inspector, as the case may be] may accord the permission applied for:

Provided that the [Chief Inspector or Deputy Chief Inspector as the case may be] may call for such other particulars as he may require before according such permission:

Provided further that the [Chief Inspector or Deputy Chief Inspector, as the case may be] may accord such permission subject to such conditions as he may consider necessary.

(4)

The fact that the permission applied for is accorded shall be noted on the plans and specifications and shall be signed by the *[Chief Inspector or Deputy Chief Inspector, as the case may be]. One copy of each of the said plans and specifications shall be returned to the applicant.

(5)

(a) A factory or part of a factory constructed, reconstructed, extended or taken into use, shall be in accordance with the plans approved by the *(Chief Inspector or Deputy Chief Inspector, as the case may be] and shall satisfy the conditions subject to which the plans have been approved.

(b) No machine or prime mover or a permanent fixture not shown in the plans approved by the Chief Inspector or Deputy Chief Inspector, as the case may be] shall be installed, fixed or used in any factory except in replacement of any machine, prime mover or a permanent fixture not occupying more floor area than that already shown in the approved plans.

4.Registration and grant of licence for a factory

(1)

No premises shall be used as factory nor any manufacturing process carried on in any factory except under, and in accordance with, the registration and licence granted under these rules.

(2)

An application for the registration of a factory and grant of a licence to it shall he submitted to the Chief Inspector in Form No. 2 in triplicate.

(3)

The fees payable for the registration and grant of a licence to a factory shall be as specified in the schedule hereto. The application in Form No. 2 shall be accompanied [by a [treasury receipt or by crossed demand draft) drawn in any branch of a Nationalized Bank in favour of the Deputy Chief Inspector of Factories of the region] evidencing payment of the appropriate fee specified in the schedule hereto.

(4)

Every application received by the Chief Inspector shall be registered in Form No. 3

(5)

No licence shall be granted until the notice specified in section 7 has been received in triplicate in Form No. 2 by the Chief Inspector.

(6)

If the Chief Inspector is satisfied that the registration and licence may be granted, such registration and licence shall be issued in Form No. 4:

Provided that the Chief Inspector may call for such other particulars as he may require before registration or grant of such licence:

Provided further that the Chief Inspector may register and grant license subject to such conditions as he may consider necessary and which shall be specified in the licence.

(6-A) [The Occupier of a factory may opt to remit the licence fees for obtaining initial licence or renewal of licence for a period up to five consecutive calendar years, instead of getting it renewed for every calendar year. Occupier shall make a specific request in Form No. 2 indicating the number of years for which licence is sought for. In such cases the fees payable for the grant or renewal of licence to a factory shall be proportionate to the annual fees as per the Schedule multiplied by the number of years for which the licence is sought for.]

(7)

Except as provided in [rule 7AA or 109] every licence granted or renewed under this chapter shall remain in force up to and inclusive of the 31st December of the year for which the licence is granted or renewed.] Maximum number of persons to be employed on any day during the year (FEE PAYABLE IN RUPEES) Total Horse Power Installed inclusive of Above Mobile 9 20 50 100 250 500 1000 2000 5000 10000 10,000 equipment

(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) Nil Horse Power 400 800 1200 1600 3600 5400 12000 18000 33000 48000 60000 Upton 10 Horse 800 1200 1600 2400 5400 9000 24000 36000 54000 72000 90000 Power Above 10 Horse 10800 Power up to 50 1200 1600 2400 3600 9000 14,400 36000 54000 72000 90000 0 Horse Power Above 50 Horse 10800 12000 Power up to 129 1600 2400 3600 6000 14400 24000 54000 72000 90000 0 0 Horse Power Above 129 Horse Power up 10800 12000 13200 2400 3600 6000 9600 24000 36000 72000 90000 to 250 Horse 0 0 0 Power Above 250 Horse Power up 10800 12000 13200 14400 3600 6000 8000 12800 36000 48000 90000 to 500 Horse 0 0 0 0 Power Above 500 Horse Power up 10800 12000 13200 14400 15600 6000 6400 12800 24000 48000 60000 to 1,000 Horse 0 0 0 0 0 Power Above 1,000 Horse Power up 12000 13200 14400 15600 16800 6400 12800 24000 32000 60000 72000 to 2,000 Horse 0 0 0 0 0 Power Above 2,000 Horse Power up 13200 14400 15600 16800 18000 12800 24000 32000 40000 72000 84000 to 5,000 Horse 0 0 0 0 0 Power Above 5,000 Horse Power up 14400 15600 16800 18000 19200 24000 32000 40000 48000 84000 96000 to 7,500 Horse 0 0 0 0 0 Power Above 7,500 Horse Power up 10800 15600 16800 18000 19200 20400 32000 40000 48000 56000 96000 to 10,000 Horse 0 0 0 0 0 0 Power Above 10,000 10800 12000 16800 18000 19200 20400 21600 40000 48000 56000 64000 Horse power 0 0 0 0 0 0 0

5.Omittedomitted

6.Amendment of licence

(1)

The limits specified in the licence granted to a factory in regard to home power or the number of persons employed shall not be altered or the name of the factory changed unless the licence has been amended by the [Deputy Chief Inspector of Factories] having jurisdiction over the area where the factory is situated.

(2)

An application for the amendment of a licence granted to a factory shall be submitted to the [Deputy Chief Inspector of Factories] having jurisdiction over the area where the factory is situated, specifying the nature of the amendment sought and the reasons therefor, at least fifteen days prior to the date on which the applicant desires the amendment to take effect. The application shall be accompanied by the original licence, if it is not already available with the [Deputy Chief Inspector of Factories, and [treasury receipt or a crossed demand draft] of any brunch of a Nationalized Bank drawn in favour of the Deputy Chief Inspector of Factories of the region] [***]

(3)

The fee for the amendment of a licence shall be [fifty rupees] plus the amount, if any, by which the fee that would have been payable if the licence had originally been issued in the form exceeds the fee originally paid for the licence.

(4)

On the receipt of such application together with the fee prescribed, the [Deputy Chief Inspector of Factories] may amend the licence suitably:

Provided the *[Deputy Chief Inspector of Factories] may call for such other particulars as he may require before amending the licence:

Provided further that the *[Deputy Chief Inspector of Factories] may amend the licence subject to such conditions as he may consider necessary and which shall be specified in the license.

(5)

The amendment made shall be incorporated in the licence and the Register of Factories.

(6)

[No fee for the amendment of a licence shall be payable when the amendments are proposed simultaneously with the application for the renewal of the licence.

7.Renewal of licence

(1)

No premises shall be used as a factory nor any manufacturing process carried on in any factory except under, and in accordance with, the licence renewed under these rules.

(2)

The occupier of every factory licensed under rule 4, shall submit to the [Deputy Chief Inspector of Factories] having jurisdiction over the area where the factory is situated, an application in Form No.2 in triplicate, for the renewal of the licence. The application for such renewal shall be made so as to be received in the office of the [Deputy Chief Inspector of Factories], not less than two months before the date on which the licence expires and it shall be accompanied by the original licence if it is not already available with the [Deputy Chief Inspector of Factories].

(3)

[The same fee shall be charged for the renewal of a licence as for the grant thereof

Provided that if the application for renewal is not received within the time specified in sub-rule (2), the licence shall be renewed only on payment of an additional fee of

(1) ten percentum of the fee payable, if the application for the renewal is received in the month of November of the year for which the licence is granted or renewed.

(2) twenty percentum of the fee payable, if the application for renewal is received in the month of December of the year for which the licence is granted or renewed.

(3) thirty percentum of the fee payable, if the application for renewal is received after the expiry of the licence. [***] [Provided further that] if the occupier of the factory opts to remit the fee for the renewal of licence for a period up to five consecutive calendar years instead of getting it renewed for every calendar year he shall indicate in Form No.2, the number of years for which renewal of licence is required.]

(4)

If the application has been made in accordance with this rule, the premises shall be held to be duly licensed until such date as the [Deputy Chief Inspector of Factories] may pass orders on the application for the renewal.

(5)

The [Deputy Chief Inspector of Factories] may renew the licence:

Provided that the [Deputy Chief Inspector of Factories] may call for such other particulars as he may require before renewing the licence:

Provided further that the [Deputy Chief Inspector of Factories] may renew the licence subject to such conditions as he may consider necessary and which shall be specified in the licence.

(6)

Suitable entry shall also be made in the Register of Factories regarding the renewal of the licence.

7A.Refusal to register and grant a licence or to renew licence in certain cases

(1)

Subject to the provisions of sub-section (3) of section 6 of the Act, the Chief Inspector may refuse to register a factory and grant or renew a licence if he is satisfied

(i) that an application is not accompanied by the documents referred to in sub- rule (2) of rule 3; or

(ii) that the conditions subject to which permission was accorded under rule 3 have not been complied with; or

(iii) that there is imminent danger to human life in the factory due to explosive or inflammable dust, gas or fumes and effective measures, in his opinion, have not been taken to remove such danger; or

(iv) that there is imminent danger to human life due to the building or the entrances thereto or exists there from being in a dangerous or structurally unsound condition, and effective measures in his opinion, have not been taken to remove the danger:

[Provided that in the case of refusal to grant or renew a licence, the Chief Inspector shall record in writing the reasons for such refusal and communicate the same to the occupier.]

(2)

The State Government or subject to the control of the State Government, the Chief Inspector may, by written order, how-ever, waive either in full or in part the surcharge so payable which shall not exceed Rs. 2000 (Rupees two thousand only).

(3)

[Where a Deputy Chief Inspector of Factories is of opinion that there is prima facie case to refuse to grant or to renew a licence for all or any of the reasons stated in sub-rule (I), he shall forward to the Chief Inspector the application for grant or for renewal of licence received from an occupier of the factory and the original licence granted to it to pass such orders as he deems fit.]

7-AA.Revocation and suspension of licence in certain cases

[Subject to the provision of sub-section (3) of section 6 of the Act, the Chief Inspector of Factories the Joint Chief Inspector of Factories may, after giving the occupier of the Factory an opportunity of making his representation, revoke or suspend the licence at any point of time during the period in which the licence is in operation, if he is satisfied

(i) that the conditions subject to which permissible was accorded under rule 3 have not been complied with; or

(ii) that the conditions subject to which licence was granted under rule 4 or renewed under rule 7 have not been complied with.]

7B.Adjustment of excess payment of licence fee

Where the amount is paid in excess of the prescribed lee for the grant of licence or for the renewal of licence, the excess amount so paid may be adjusted towards the fee payable for renewal of licence for the subsequent year [or years], by the [Deputy Chief Inspector of Factories], on request from the occupier.

8.Transfer of licence

(1)

The holder of a licence or in the event of his death, any person carrying on the business of such licensee may, at any time, before the expiry of the licence, apply for permission to transfer the licence to another person or to himself.

(2)

Such application for transfer shall be made to the [Deputy Chief Inspector of Factories] concerned and accompanied by a fee of [fifty rupees] for each such application.

(3)

The [Deputy Chief Inspector of Factories] concerned, if he approves of the transfer, enter upon the licence under his signature, an endorsement to the effect that the licence has been transferred to the person named:

Provided that the [Deputy Chief Inspector of Factories] concerned may call for such other particulars as he may require before effecting the transfer:

Provided further that the [Deputy Chief Inspector of Factories] concerned may effect such transfer subject to such conditions as he may consider necessary and which shall be specified in the licence.

(4)

Suitable entry shall also be made in the Register of Factories regarding the transfer.

9.Procedure on death or disability of licensee

If a licensee dies or becomes insolvent, the person carrying on the business of such licensee shall not be liable to any penalty under the Act for exercising the powers granted to the licensee by the licence during such time as may reasonably be required to allow him to make an application for the transfer of the licence under rule 8 in his own name for the unexpired portion of the original licence

10.Loss of licence

Where a licence granted under these rules is lost or accidentally destroyed, a duplicate may be granted by the [Deputy Chief Inspector of Factories] having jurisdiction over the area on payment of a fee of [fifty rupees].

11.Payment of fees

(1)

[Every application relating to grant, renewal, transfer and amendment of licence under these rules shall be accompanied by a [treasury receipt or by a crossed demand draft) of any branch of a Nationalized Bank drawn in favour of the Deputy Chief Inspector of Factories of the region [***]

(2)

If an application for the grant or renewal of a licence is refused, the fee paid shall be refunded to the applicant by the Chief Inspector.

(3)

If the Chief Inspector is satisfied that a factory has not worked even on a single day during the period of licence, he may order the refund of the licence fee collected for that period. [Provided that where the licence is issued or renewed for more than one calendar year, the refund shall be made only in respect of that calendar year in which the factory has not worked even on a single day]

12.Notice of occupation

The notice of occupation shall be in Form No. 2.

12A.Notice of change of manager

The notice of change of manager shall be in Form. No. 3A.

12B.Plans and licence

(1)

The plans approved by the [Chief Inspector or Deputy Chief Inspector, as the case may be] under rule 3 and the licence granted for a factory under rule 4 shall be readily available in the factory for inspection by the Inspectors and additional Inspectors appointed under section 8 of the Act.

(2)

The plans and layouts or factory buildings sent to the [Chief Inspector or Deputy Chief Inspector, as the case may be] for approval under rule 3 shall be prepared by a person possessing a diploma or degree in Engineering or pass in the examination prescribed for the Engineering Subordinate or the Overseer class or the Draftsman class in the College of Engineering, Guindy.

(3)

After the date of the commencement of the Act, no manufacturing process shall be carried on in any factory constructed, extended or taken into use as a factory or part of a factory until a certificate of stability in respect of the buildings in the form below has been sent by the occupier or management of the factory to the Inspector.

Provided that the certificate of stability sent by the occupier or management of the factory to the Inspector as required in this rule shall be valid only for a period of three years from the date of its issue and within thirty days after the expiry of the said period, a fresh certificate of stability shall be sent to the Inspector. Form of Certificate of Stability

(1) Name of the factory

(2) Village, town and district in which the factory is situated

(3) Full postal address of the factory

(4)

Name of the occupier of the factory

(5)

Nature of manufacturing process to be carried on in the factory

(6)

Number of floors on which workers will be employed.

I certify that I have inspected the building on the.....in which...... is housed and examined the various parts including the foundations as shown in the complete plans approved by the Chief Inspector in his letter No...dated...with special reference to the machinery, plant, etc.. that have been installed. I am of opinion that the building has been constructed/extended in accordance with the plans approved by the Chief Inspector in his Letter No...dated... that it is structurally sound and that its stability will not be endangered by its use as a factory for the manufacture of...for which the machinery, plant, etc., installed are intended.

Place: (Signature) Date: Name, designation and qualifications.

Note: No certificate of stability is necessary in the case of existing buildings for which no plans have been approved prior to 1948.

(4) [The certificate of stability referred to in sub-rule (3) shall be signed by a competent person recognized by the Chief Inspector under rule 2-A for that purpose.

(5) [An occupier shall not use any premises as a factory or carry on any manufacturing process in a factory unless a licence has been issued in respect of such premises and is in force for the time being] [Provided that if a valid application for grant or renewal of licence has been submitted and the required fee has been paid, the premises shall be deemed to be fully licensed until such date as the Chief Inspector grants or refuses in writing to grant or renew the licence, or the Superintending Inspector having jurisdiction over the area where the factory is situated, renews the licence.]

12-C.Guidelines, instructions and records

(1)

[Without prejudice to the general responsibility of the occupier to comply with the provisions of Section7-A, the Chief Inspector may, from time to time issue guidelines and instructions regarding the general duties of the occupier relating to health and safety and welfare of all workers while they are at work in the factory.

(2)

The occupier shall maintain such records, as may be prescribed by the Chief Inspector, in respect of monitoring of working environment in the factory.]